Jump to content

Log in or register to remove this advert

Rope splicing in Devon


Benm
 Share

Recommended Posts

10 minutes ago, Tommy_B said:

Make sure that whoever splices it is familiar with the manufacturer and type of rope before they touch it. @Rich Rule and his Tachyon splice is a good example of Boat yards sometimes biting off more than they can chew.

I took a hang of New England fly to my local chandlers many years back, splice was fine but needed rewhipping. I enquired in the main office if it was something the lads could handle as it was an unusual splice. The guy replied along the lines of ‘my guys are familiar with every splice’. Well they clearly weren’t when it came to it, there was 3 of them gathered round it full of intrigue 😀

  • Haha 1
Link to comment
Share on other sites

Log in or register to remove this advert

2 hours ago, Steve Bullman said:

I took a hang of New England fly to my local chandlers many years back, splice was fine but needed rewhipping. I enquired in the main office if it was something the lads could handle as it was an unusual splice. The guy replied along the lines of ‘my guys are familiar with every splice’. Well they clearly weren’t when it came to it, there was 3 of them gathered round it full of intrigue 😀

Fly is an ugly splice. I've done it once just to see if I could. No inclination to do it again!! The Slaice is much nicer on Fly and its quite a nice rope all in all.

 

I wouldn't dream of splicing a rope that I don't know about and sending someone off to climb with it.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
On 06/10/2022 at 10:31, devon TWiG said:

Try these then 

WWW.WESTWARDROPEANDWIRE.CO.UK

Supplying quality rope, both natural and manmade, wire rope and rigging, high tensile and stainless steel fixings, lifting slings and equipment, shackles, thimbles, a large range of...

 

Thanks. I've emailed them. 

Link to comment
Share on other sites

On 06/10/2022 at 10:29, devon TWiG said:

not sure they can provide LOLER certs , which I think would be required , I always spliced my own in the past , and prussic / blakes , but not the new types of rope ...

 

Thanks. Yeah, this is my concern. Of course, I want to know that it's safe. So I need to see some certification for my own peice of mind.

Link to comment
Share on other sites

1 hour ago, Dendrologen said:

Oh really? Came undone?!

The splicer said they could do it and they were clearly unfamiliar with that type or splice so basically did what they thought was right and it was nowhere near suitable for life support. It looked like it wouldn't hold a boat, let alone a person!

Link to comment
Share on other sites

35 minutes ago, Tommy_B said:

The splicer said they could do it and they were clearly unfamiliar with that type or splice so basically did what they thought was right and it was nowhere near suitable for life support. It looked like it wouldn't hold a boat, let alone a person!

...oh dear

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.