Nova lathe programming

[bob]

Turning club have a nova lathe

If I programme some speeds ect in will it retain that info or would it need doing every time we plug it in?

[se7enthdevil]

not had one so don't know exactly what you are referring too but why would you need the lathe to remember the speeds? you just turn it to whatever speed you need for whatever item you are turning...

[bob]

not had one so don't know exactly what you are referring too but why would you need the lathe to remember the speeds? you just turn it to whatever speed you need for whatever item you are turning...

 

You do need to have a go then Steve

Very very slow to speed up

That and the bleeping noises would really put me of buying one

So glad I got a 3520b just for the speed knob

[se7enthdevil]

i've got a jet 3520b too, great aren't they...

 

 

it sounds like the nova is quite technical so you may need to ask nova or you could try asking on the AWGB forum as there is a wealth of knowledge there (and people who own the same lathe) so you should be able to get some answers or have someone point you in the right direction.

[bob]

i've got a jet 3520b too, great aren't they...

 

 

it sounds like the nova is quite technical so you may need to ask nova or you could try asking on the AWGB forum as there is a wealth of knowledge there (and people who own the same lathe) so you should be able to get some answers or have someone point you in the right direction.

 

Sure a few on here have them

I dare not start with another forum

This eats far too much time

 

Best lathe I have used

Just wish more time to play

[dervishcarving]

the only speed control on my personal lathe is how fast i pump the pole-cord