chp woodchip

[Busy Daddy]

There is another one localy that is going in that will run on pellets

These 2 are already getting installed , I will try and find out more

I have just been asked to produce this large size of chip

[renewablejohn]

There is another one localy that is going in that will run on pellets

These 2 are already getting installed , I will try and find out more

I have just been asked to produce this large size of chip

 

Pellets are a lot easier and will produce cleaner gas.

[Busy Daddy]

John morning hows the heizohack going

Just found the specs for the boiler 15mm to 55mm zero fines so it will need sieving

[renewablejohn]

John morning hows the heizohack going

Just found the specs for the boiler 15mm to 55mm zero fines so it will need sieving

 

You may find they want it debarking before chipping.

[Busy Daddy]

Never thought of that , I will ask

[renewablejohn]

John morning hows the heizohack going

Just found the specs for the boiler 15mm to 55mm zero fines so it will need sieving

 

Heizohack going fine just need a new engine in the MB Trac to run it.

 

Your heizohack with 50mm screen will easily do that you will just have to rescreen with a 15mm screen to take out the fines. Personally I would use a 20mm screen just to be on the safe side and adjust the price accordingly to take into account the extra waste.

Edited October 13, 2015 by renewablejohn

[Gray git]

Out of curiosity is the timber completely burnt in this system or reduced to carbon like charcoal? Nd could this byproduct be used in a conventional system?

[Busy Daddy]

Havent got a clue about that , are you wanting to get into charcoal as well

[renewablejohn]

Out of curiosity is the timber completely burnt in this system or reduced to carbon like charcoal? Nd could this byproduct be used in a conventional system?

 

No just ash. approx 45 gall drum full every 2 months or so I was told.

[Busy Daddy]

That's a lot of ash

Someone was telling me that the engine on these boilers only lasts 3 years then they have to replace or rebuild it