Anyone interested in an Arrowsmith Kiln

[woodland dweller]

I a'm thinking about selling mine but don't know what to ask for it.

All the electrical stuff is getting on a bit but the box i remade about 4 years ago. I last used it around 3 years ago to do a load of Douglas.

The drying section is 3M long x 900mm wide x 1.2M high and the total length is 2.5M long x 1.4M high x 1.2M wide.

The box is made from 2 inch insulated panels.

Their is a clamping system inside using 6 C section irons top and bottom with 6 lorry straps, used to crank the the timber down tight to stop it twisting.

Instruction manual included.

Anyone interested !

[shendy]

Price. Photos and where abouts are you?

[woodland dweller]

Hi Shendy,

I will take some photo's tomorrow.

Don't know what its worth, open to offers.

East Devon

[woodland dweller]

Below are the pictures of the kiln.

 

Surely it has got to be worth around £300. If someone had asked me to make the box, I would price it up at around £200, that leaves all of the electrics and the clamps for about £100.

 

Sorry, didn't know how to rotate the pictures.

[se7enthdevil]

i am interested but i've got nowhere to put it...

[shendy]

Is it 3 phase?

[woodland dweller]

Now sold.

[shendy]

Booger. Looked perfect.