Dolmer 6100 + 15" guide

[diervek]

It's a 10 tooth tip isn't it ?

Bar tip, aye.

 

Sent from my HTC One using Tapatalk

[Stubby]

It's a 10 tooth tip isn't it ?

 

Oh Sorry . I thought you were talking about the drive sprocket on the power head ! .

[SawTroll]

It's a 10 tooth tip isn't it ?

 

Of course - nose sprocket!

 

I often used a 15" bar with a 10t nose on my MS361W, with a 3/8x8 drive sprocket. It was a "killer" combination for limbing!

Edited September 25, 2015 by SawTroll

[wyk]

Some course instructors only allow 50cc saws for the 30/31. You may want to check on that as well.

[diervek]

Some course instructors only allow 50cc saws for the 30/31. You may want to check on that as well.

 

I did say it was a 60cc and I was only told it needs to be <15", so all good.

[shavey]

I did say it was a 60cc and I was only told it needs to be <15", so all good.

 

How did you get on with your course :thumbup:

[diervek]

How did you get on with your course :thumbup:

 

All good thanks, the dolly did me proud. 👍

Climbing in January hopefully 👌

[shavey]

All good thanks, the dolly did me proud. 👍

Climbing in January hopefully 👌

 

Great news onwards and now upwards :thumbup: