Jump to content

Log in or register to remove this advert

Increasing surface levels within an RPA


benedmonds
 Share

Recommended Posts

I have a client developing a property. They have a mature old oak tree growing at the top of a sunken garden, they wish to fill the area so that the front garden is level. The sunken garden is approx 1m deep and has a patio base with decorative rock around the perimeter.

 

Is there a way we can fill it up to ground level and ensure we don't damage to rooting environment below? The ground level around the trunk will remain the same..

Link to comment
Share on other sites

Log in or register to remove this advert

I have a similar scenario where ground level has to be raised within RPA of a TPO Beech Ben. Still talking with architect / LA to finalise an acceptable solution. If what has been proposed is not acceptable, I'll be getting in touch with Laura at

 

Geosynthetics - Cellweb® Tree Root Protection

 

Let us know if you get a suitable solution?

Link to comment
Share on other sites

What do they want the top surface to be?

 

If it could be a gravel surface, could you fill the hole with large stones, cover with a membrane and then dress with gravel? That would still allow water to percolate down to the existing soil, and gaseous exchange.

 

If they want to turf the top it could be more tricky trying to create a sub-base that allows the above but is stable enough. Perhaps large stone base, some Silva cell crates, membrane then turf?

 

Let us know how you get on.

Link to comment
Share on other sites

Sounds like an engineering operation so you may need planning consent although LPA's usually try to dodge it.

 

What about a concrete raft on mini piles with a clear void beneath. Fence posts and gravel boards around the outside and infill with what you like. Cell web may be best. You would need to redistribute surface water underneath somehow. Irrigation pipes connected to weep holes maybe or drainage holes in the bottom with something to stop them clogging.

 

A bit out there bit I don't see why it wouldn't work. Expensive also and needs an engineers input maybe.

Link to comment
Share on other sites

So cellwebs idea, is to put down membrane, then cellweb filled with clean angular stone then membrane and top soil on top...

 

How much topsoil do you think would be OK? The issue is that too much soil is going to impede gas exchange, but to little and the grass is never going to grow on what will be a very free draining spot.. 30cm?

Link to comment
Share on other sites

  • 2 weeks later...

How badly does client need a lawn? Any way to restore sunken garden to acceptable appearance?

If not, remove hardscape before filling with soil (good advice above) so the oak roots can colonise the fill. Could be anet benefit over time for oak if done well.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.