Milling in Conwy, Wales

[muttley9050]

Evening. Been offered a saw milling job in Conwy. It's to far for me. 3 ash butts all 2ft and average of 9ft long. Bad access, alaskan only, one butt needs winching /rolling away from a stump.

If anyone wants a recommendation put contact details here or pm me.

James

[muttley9050]

No takers?

[Big J]

It just doesn't sound that tempting!

[gobbypunk]

Too far away

[muttley9050]

I'd be tempted if it were closer. 100yds from her drive but no access for anything other than a wheel barrow. 2 butt's ready to cut and 1 needs rolling a little. She asked me how much she should expect to pay I said £350+ depending on cutting list.

Don't get what's not tempting about it. Except it's in Conwy. Never mind will have to tell her it's fire wood.

[Big J]

I'd be tempted if it were closer. 100yds from her drive but no access for anything other than a wheel barrow. 2 butt's ready to cut and 1 needs rolling a little. She asked me how much she should expect to pay I said £350+ depending on cutting list.

Don't get what's not tempting about it. Except it's in Conwy. Never mind will have to tell her it's fire wood.

 

It's the 100 yard carry!

[muttley9050]

It's the 100 yard carry!

 

So take a wheel barrow. No need to extract the timber

[Cae Ffynnon]

How much of a rush is your client in. I'm half an hour away or two days by wheel barrow. Would have some time towards the end of the month.

 

Chris

[muttley9050]

Don't think there's a rush, she just wants to not log it. If you pm your email to me I'll forward it to her and you can discuss. If necessary I can lend you my jet barrow and you might make it in a day.