Jump to content

Log in or register to remove this advert

New Chain Sticking


Justjames1961
 Share

Recommended Posts

Hi all, wonder if someone can point me in the right direction here.

Fitted a new chain to my MS 251 and it runs fine for about 30 seconds or so, then it jams in the bar.

Saw is oiling fine, it's meant to be a genuine Stihl chain, thought bar was past its best so tried a new bar as well, same thing happens.

Put old chain on and runs fine. Confused .com???

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The bar should be stamped with the correct chain size etc to use then compare it to the chain.

Theres normally a number stamped on the chain you can google if it doesn't state which.

 

It certainly sounds like a chain issue if your old ones where fine with it. Take it you've done the obvious and cleaned the bar groove etc.

Link to comment
Share on other sites

You need to check the kerf.

Theres the latest .043 micro then theres .050 .058 and .063

 

There are the 4 above different widths now available for .325 chain

 

Sounds like you have the next width up from what your bar is meant for. As mentioned previously it will be on the bar.

Link to comment
Share on other sites

You need to check the kerf.

Theres the latest .043 micro then theres .050 .058 and .063

 

There are the 4 above different widths now available for .325 chain

 

Sounds like you have the next width up from what your bar is meant for. As mentioned previously it will be on the bar.

 

Ok what it says on bar is .325 1.6mm 0.063 68 link.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.