husky 576 ignition module

[forest tink]

would one from a husky 372 or 365 fit the 576?

[wisecobandit]

Yes.

If yours is a blue module its limited so fitting a black coil will unlimit the rpm but they are interchangeable between blue and black.

 

You should hopefully find one of the below part numbers on the coil.

 

544047201, 544047201, 537277401, 537277401, 510115701 510115701

Edited January 28, 2015 by wisecobandit

[forest tink]

i think it was grey,just looked at it half an hour ago too,pretty sure its grey aye

[wisecobandit]

Just added the part numbers which are all intechangable between themselves. Yours may or may not have a part number but if it does it should relate to one of the above which are also all interchangeable on the 365/372 range

[spudulike]

The same part is listed for the 372 Xtorq - this has the same bottom end as the 372XP so you should be OK - 510 11 57-01 is the boy:thumbup: The earlier ones will have a different number and the limited coils will have a more aggressive advance curve!

[forest tink]

cheers guys

[forest tink]

just one more thing guys,how much do these roughly cost just out of interest ?,cant seem to find a price anywhere

[adw]

The only grey ignition unit is for the Auto tune saw, you cannot fit the 372/365 unit in place of this one.

[spudulike]

The only grey ignition unit is for the Auto tune saw, you cannot fit the 372/365 unit in place of this one.

 

 

 

Good point, we were thinking it was the non autotune unit

[forest tink]

sorry forgot to say it was autotune,does that have it own ignition module for that saw only ?