Jump to content

Log in or register to remove this advert

560xpg problems

Caleb

By Caleb,
in Chainsaws

 Share

Recommended Posts

Caleb Collaborator

Caleb

Posted
Posted

Hi today we got our new saw a 560xpg it started up fine and I was setting up the auto carb, after I did a few cut I turned it off and when I came to restart it, it started an just as I was about to cut it cut out and made a free running sound after some searching I found that the bolt on the fan was loose and so I fixed that problem. However when I came to restart it, it ran up fine but when I turned it off it made a sound that sounded like it back fired and then wouldn't start, so left it over lunch and came back after and started it when I got it started it ran perfectly, but when I pushed the stop it made the back fire sound again then wouldn't start again. Does anyone know what might cause the problem and if I should just send it back?

Link to comment
Share on other sites

Log in or register to remove this advert

Brushcutter Grand Master

Brushcutter

Posted
Posted
So contact my supplier then!

 

Should of got a Dolmar or a 550. Them 560s are nothing but trouble:001_tongue:

 

On a more helpful note sound like something is up in on the flywheel side. Just put it back in the box and send it back.

 

I'd also say you want a new one not that one fixed. If its giving trouble out the box it will be nothing but trouble in the future.

Link to comment
Share on other sites
spudulike Grand Master

spudulike

Posted
Posted

The backfiring is the spark plug firing on the downward stroke with ignition timing well thrown out by a damaged flywheel key. It is a classic sign and on a new saw - it is back to the dealer.

 

A new one should really be fitted although you can get round it with a timing wheel and a bit of luck.........but not on a new saw!

Link to comment
Share on other sites
SawTroll Mentor

SawTroll

Posted
Posted
The backfiring is the spark plug firing on the downward stroke with ignition timing well thrown out by a damaged flywheel key. It is a classic sign and on a new saw - it is back to the dealer.

 

A new one should really be fitted although you can get round it with a timing wheel and a bit of luck.........but not on a new saw!

 

 

I totally agree!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  •  

  • Featured Adverts

  • 3
    Cassian Humphreys

    Tree Welding & Natural Grafts - The Magic of Myrtaceae

    5
    matt padden

    Stihl ms461 parts

    9
    Lev Community

    Arb Chip Wanted

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept