Kwikchip 160

[colwoodlandcare]

Already taken them out and sharpened them but hasn't solved the problem.

 

 

Sent using Arbtalk Mobile App

http://Www.colwoodlandcare.co.uk

[Johny Walker]

Already taken them out and sharpened them but hasn't solved the problem.

 

 

Sent using Arbtalk Mobile App

Colwood - Home

 

wich face did you sharpen,if you did the out side 1, there now knackerd ????

[colwoodlandcare]

Nope. It started bouncing a few weeks back out of the blue, so gave them a sharpen thinking that would help but it hasn't.

The bottom roller is running a little low on how much is left but then it was running low a few months back when it was fine.

 

 

Sent using Arbtalk Mobile App

http://Www.colwoodlandcare.co.uk

[Johny Walker]

Nope. It started bouncing a few weeks back out of the blue, so gave them a sharpen thinking that would help but it hasn't.

The bottom roller is running a little low on how much is left but then it was running low a few months back when it was fine.

 

 

Sent using Arbtalk Mobile App

Colwood - Home

 

any pics

[colwoodlandcare]

I'll grab some during the week and post them up.

 

 

Sent using Arbtalk Mobile App

http://Www.colwoodlandcare.co.uk

[PeteB]

I would look at the downward pressure and the cutting mechanism.

 

Check the quality of your woodchips, if it is struggling to chip and/or producing shreds, then the infeed will be affected.

 

Check that the springs that pull the top roller down are still effective and that the top roller can rise and fall smoothly.

Edited August 27, 2014 by PeteB
duff English!