Jump to content

Log in or register to remove this advert

Entec feed rollers!!

hamdogg

By hamdogg,
in General chat

 Share

Recommended Posts

hamdogg Grand Master

hamdogg

Posted
Posted

I was chipping this morning with my 150 entec and when i put larger pieces of timber through it seems to stop the rollers, then I have to press the intake button again, so basically when feeding bigger bits through it seems to be setting off a sensor and stopping the rollers?! The control box is an old one, and I'm wondering whet ether or not to change it for a new tw box.

Link to comment
Share on other sites

Log in or register to remove this advert

Suffolk-Matt Mentor

Suffolk-Matt

Posted
Posted
is the throttle fully down, cos I have that problem and have now sadly have to use a bungee to hold it down !

 

they should come shipped with a bungee!

 

Check that first^^

 

When the rollers stop do they stop or turn VERY slowly? I had the turn slowly issue and turned out to be the older control box with the switches playing up, the newer type are better (metal paddle ones).

 

There are a few threads on this already, think i started at least 2, look in large equipment section :thumbup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  •  

  • Featured Adverts

  • 5
    matt padden

    Stihl ms461 parts

    9
    Lev Community

    Arb Chip Wanted

    726
    Tony Croft aka hamadryad

    Pollards, the forgotten art-discussion

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept