Jump to content

Log in or register to remove this advert

Suffolk-Matt

Member
  • Posts

    862
  • Joined

  • Last visited

Everything posted by Suffolk-Matt

  1. Yes it was older threads I was reading, thanks
  2. Im not sure, I have read both. Some of the carbs are different I have also read.
  3. As above, would it work? I have a 2013 365 xtorq
  4. been let down Very last min but after a climber for tomorrow (Thursday) and Friday this week. 3 big take downs in Felixstowe PM if interested
  5. That sounds like a good method. Im not one for sharpening them either, it just so happened my local hire shop offered to do them for £2 a tooth, still, even with a good tickle up they are no where near the performance of a new tooth. Box of 50 seems to be the way to go.
  6. sp4012 Has 8 cutters, more of a squashed 50p shape.
  7. Ah thats a different layout, with that id change all the teeth.
  8. Is your a 4 tooth square wheel? Mine a little different as has about 8 in total ( maybe 10) and is more of an oval shape
  9. I might try a pair of Rhinos next time. Do you ever change the non leading / inner teeth then? Im thinking of leaving mine completely and simply changing the 2 important ones. Be great to see a side on slow mo vid of this head in action
  10. New grinder came with multi tip teeth, I like them but want to fine tune the use of them. I understand that the 2 leading edges do the work, and these two need to be sharp. What about the others? I did a test and removed all of my teeth and had a local shop grind them good, as best as they could. Seemed to be no difference in cutting performance. So do the non leading edges really just clear the waste? is it even worth having these made sharp or just leave them clearing until theres no metal left on them? Its great being able to change just 2 leading teeth in 3 mins and have a seemingly new machine but not sure how to get best value from this system. Input please
  11. Chip can be taken to Material Change in Needham Market, Its free to dump it. Green waste can also be left but is charged at £30 per load ( that includes logs ). Recycling Sites
  12. https://www.gumtree.com/p/plant-tractors/timberwolf-150-fully-refurbished-woodchipper-chipper-stumpgrinder-/1219186582 07999358671 13 Turnberry Grove, Hartlepool TS27 3PX, UK
  13. In brief, Lady has a cherry tree in very close proximity to a wall, wall and tree both around 25 years old. Wall now has significant lean. I wont bore with the other details but a report is needed as to the fact the tree is effecting the wall and a plan of action to remedy. Structural engineers tell her to get a "tree person" to create the report but a remedy pan is also required (engineering background needed!) Any advice that i can pass on?
  14. Same here, about the last 2-3 months. Its Arbtalk for certain as it never happens on other tabs.
  15. FB's user base is generally older than many think, younger generations tend to use other social platforms ( Twitter, snapchat etc) as the main outlet. Having regularly updated social media is important, google will see every reaction with a post, every like, every comment, the page you went to before and after you did any of the above. All of that will organically ( thats without paying) get you further up Google search results. Its very quick and simple to set up a few social media accounts, most of all free, keep them active and updated.
  16. Did consider it. Main issue is the exhaust is forward facing, the throttle control and manual clutch lever are also on the front side of the engine. So, to either knock back the revs, or engage the clutch requires leaning around the front of the engine inches from the exhaust getting a face full each time. But yes, a 90 degree bend on the tip may well help things.
  17. Thanks Steve, ill check it out Chippers fine John, its the grinder that gives me a face full.
  18. Just changed to a diesel grinder and the fumes are leaving me in a bad state after a few hours use. Anyone recommend a mask? I looked on screwfix ( they sent me some vouchers) but there hundreds on the website.
  19. Yours sits higher than mine did, here is how i did mine -
  20. As per title, extra set of hands required for a large job in Ipswich town centre, CS30/31 an advantage but not essential. Monday 9th onwards
  21. How much are you spending per month on advertising and with who?
  22. ^^this. Handle got me under chin once, very lucky to end with just bruising and no lost teeth.
  23. F*ckers, You in a boat yard then? Had a colleague liveabord in Pin mill who was done over a few years ago. If you need stuff to keep working PM me.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.