Tractor Sanderson Forklift

[Fencing]

Hi All, Just bought one of the above, has anyone got the foggiest idea how it fits on the tractor?

[doobin]

3 point linkage unless it's a specific direct mount for a particular tractor/front of tractor

[Paper Rustler]

I have just had one modified to fit my 3 point linkage. Will try and take some photos tomorrow and post.

[C.J]

http://www.farmmachinery.co.uk/wp-content/themes/classifiedstheme/thumbs/13791-455-2014-04-07377421.JPG

 

3 point linkage.A frame to tractor toplink bracket and tilt ram to A frame.

[mendiplogs]

Hi All, Just bought one of the above, has anyone got the foggiest idea how it fits on the tractor?

 

Hi mate there a good old fork lift mate thanks Jon

[Fencing]

I have just had one modified to fit my 3 point linkage. Will try and take some photos tomorrow and post.

 

That would be great. id really appreciate it.

[Fencing]

http://www.farmmachinery.co.uk/wp-content/themes/classifiedstheme/thumbs/13791-455-2014-04-07377421.JPG

 

3 point linkage.A frame to tractor toplink bracket and tilt ram to A frame.

 

Hi, thanks for the picture. That's the kiddie. It just doesn't seem to sit right. The link arms and the A frame seem too far away from the tractor, especially when you see link below and there are no link arms on the tractor!

 

http://i.ebayimg.com/t/sanderson-tractor-mounted-forklift-international-454-front-weights-/00/s/OTU4WDE2MDA=/z/j6IAAOxyqOxRrQjE/$(KGrHqZHJBQFEzSJqspSBRrQjEiGWQ~~60_35.JPG

[C.J]

http://i.ebayimg.com/t/sanderson-tractor-mounted-forklift-international-454-front-weights-/00/s/OTU4WDE2MDA=/z/j6IAAOxyqOxRrQjE/$(KGrHqZHJBQFEzSJqspSBRrQjEiGWQ~~60_12.JPG

 

Here they've taken the lower links off the tractor,attached the forklift to the brackets under the axle and connected the lift rods back to the forklift.

[Peasgood]

We have one on a 35.

lift arms come off the tractor and the "arms" on the lifter bolt to the rear axle as above. Another link goes to the top link pin hole on tractor end.

Whole thing is fastened solid to tractor, hydraulics provide lift, tilt etc.

 

Not a setup that goes on and off like on 3 point linkage. I have a 3 point linkage version too for other tractors.

 

The Sanderson is usually for a specific tractor.