Jump to content

Log in or register to remove this advert

Cables and pipes


Fencing
 Share

Recommended Posts

Log in or register to remove this advert

Sorry to jump on someone's post but...

 

Does it matter wot u use for ducting? Does it have to be solid?

 

Was thinking of doing something similar but using perferated drainage pipe as nice and cheap. Would that affect anything?

Also i take it from a previous post water and electrics shold not share the same duct?

 

Cheers

Link to comment
Share on other sites

i would just use land drain like you suggest, nice and cheap. the ducting is only there to hold the earth away, it dosent offer any protection at all. i personally wouldnt have a problem with laying a water duct in the same trench as mains or elv cables, as long as each service has there own duct.

Link to comment
Share on other sites

as a spark, put at least 2 ducts, seperate extra low voltage to low voltage, eg you dont want telecom in the same duct as mains voltage cable. i would say 100mm duct for mains and 50mm for telecom. put at least 5 draw strings through each 1. If in the future you have a cable in the duct allready and you need to add another theres a good chance you'll damage the existing cable if you rod the cable through. make sure that each side of the draw stings are well tied onto a batten hammered in the ground either side so they cant be pulled out when the first cable is pulled in. As for the cat5e i would personally use armoured cat5e or amoured telecom cable underground, the water will quickly destroy any unarmored cable. Oh and a seperate duct for the water ofcourse!

 

+1 all you have said. only thing i would do is put in a inspection hatch so far along in case you need to get to it and can not pull a cable through. any inspection hatch and cover from a builders merchant will do. openreach did new cable save having to pull the whole lenght

Link to comment
Share on other sites

Ah, ok it's more what the eye doesn't see...

 

Ducts still make sense for this though and if you lose the string a sandwich bag and a leafblower works for 100 metres.

 

Or a vacuum cleaner at the other end – works a charm!

 

And with regards to putting in draw cords... No reason to put in more than one. Just remember to pull another one in alongside any cable that is installed, so you will always have a draw cord in the duct.

Link to comment
Share on other sites

Don't know the regs but know what may get used a bit up here ,90mm Dinn spec SDR 17 HDPE pipe ,use compressor to blow through the armoured cable & 25mm alkathane , cat5 or fibre optic can be installed later . Dinn should be about £2ish + veg& tatties a metre .Easy dig easy bury

Edited by Stu3k
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.