Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Posted
cool not had a 25" before, but the 18" on that 280 is pretty old got through a good few chains on it, is the 361 strong enough to run the 25" standard or ported only? wouldn't like to run anything bigger than the 18" on the 280..

 

I had a 25" on my old muffler modded 361 for a try, and I didn't like it. But a ported saw with increased compression pulls them fine.

 

[ame=http://www.youtube.com/watch?v=Cbuvz27qXOU]MS361 ported in Beech with 25" bar - YouTube[/ame]

Posted

I've got the extended bumpers on my 461 and they make it a different animal! Need to get one of those wrap handles, can you buy one without the rest of the rescue conversion kit?

Posted
I've got the extended bumpers on my 461 and they make it a different animal! Need to get one of those wrap handles, can you buy one without the rest of the rescue conversion kit?

 

where do you get the bumpers?

Posted
where do you get the bumpers?

 

 

Got them from my local dealer, was a bit of a faff getting the right part numbers, I'll see if I can dig them out for you, you do loose a couple of inches of bar length but mine mostly lives with the 25 on it so no big loss

Posted

that'd be great if you could find the part numbers! thanks :)

 

mine is 25" at the moment too, but I'll be getting a 20" for it too, not worried about losing a little bar length though!

Posted
that'd be great if you could find the part numbers! thanks :)

 

mine is 25" at the moment too, but I'll be getting a 20" for it too, not worried about losing a little bar length though!

 

Can't seem to find them sorry, thought I had them written down somewhere...

Posted

ahh ok never mind, do you know if they're the same fitment as the 440/460? I've seen 460 ones listed but not 461

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.