Entec Chippit 18 Wiring Diagram help??

[Big T]

Cheers for that!

[niftysteve]

Cheers for that!

 

had the ignition apart on mine today

red is battery

and on mine blue was on the st (start)

[Gups 1828]

I recently bought an entec chippit with the 18hp k engine, does anyone know what the maximum size wood it'll eat , seems absolutely fine with 3" any advise on this appreciated

[Big T]

They are rated at 4" as far as im lead to believe. You will have to feed it in slowly so that it dosent stall the engine seeing as there is no stress control on the machine, your arm is the stress control! Tidy lookin machine by the way.....

[Big T]

had the ignition apart on mine today

red is battery

and on mine blue was on the st (start)

 

Thanks mate!

[Gups 1828]

That's about what I thought 4" thanks for your reply and sorry for derailing your thread , it certainly does work well for a little chipper and just about big enough for my needs at the min, good luck with yours and I hope you get your ignition sorted

[Big T]

Thanks mate! I think the chippit 18 was the earlier version of the Timberwolf 18/100g that they sell now. Entec become Timberwolf sometime in the 90`s. It should suit me fine as im just a one man band!

[peatff]

If they follow standard wiring red will be batt (permanent live), blue will be start which is the momentary wire to the solenoid on the starter(should be blue at solenoid as well), white will be ign and black will be acc (switched ignition).

[Big T]

Thanks mate, I just got home from working on it and its sorted! Think the red one was the live from the solinoid, the black one went to the negative on the solinoid, the blue went to the coil and the white was the kill that went to the acc on the switch! It works now so im a happy bunny!