New Truck

[Dean Lofthouse]

whats the chipper?

 

 

12" Bandit

[Ross Winchester]

Nice trucks.

[Stuart Witt]

The body was made by Tipmaster.

 

Steve the chipper is a Bandit 90 (9inch), a very nice chipper it is too.

[Dean Lofthouse]

How do you find the 90 Stuart?

 

Do you have any problems with the bottom roller jamming with bits of wood.

[Stuart Witt]

How do you find the 90 Stuart?

 

Do you have any problems with the bottom roller jamming with bits of wood.

 

Dean it does have that problem, i belive its due to the hydrulic pressure, i have had someone come out a few times before and adjust the ram on the yoke and the roller pressure.

 

dropping the flap underneath it helps a bit but you end up with loads of waste on the ground.

[Dean Lofthouse]

Dean it does have that problem, i belive its due to the hydrulic pressure, i have had someone come out a few times before and adjust the ram on the yoke and the roller pressure.

 

dropping the flap underneath it helps a bit but you end up with loads of waste on the ground.

 

I have found that never opening the flap to empty the void under the feedwheel helps, the crap then hugs the wheel and doesn't allow any large bits in.

 

Still a pain in the rear IMO though, just a design fault.

 

Mines the 65XL BTW