Jump to content

Log in or register to remove this advert

All the Burr boards


Big Beech
 Share

Recommended Posts

Managed to get the timber out of the woods whilst dry just a few days ago. they where cut 2" thick and managed to get two at a time on a sack barrow type dolly trolly and pulled them out. wow. that was some tuff pullin!!!!!

 

Looking at the Oak out in good light, it looks as if some of the boards are stained and have a browny pinkish look. Would this be brown Oak?

the right hand slab that is the "Y" board i cut in half again today as it was 4" and the colour stain and rays where exceptional!

also the other pic shows a central split, where i milled the log around 2/3rd " out of center along the 7ft lenght. two boards show this central split but not all the way through. will i loose these boards as due to splitting. (can be seen in the right image as well)

 

and lastly prices. what would boards like this fetch? one website i looked at wanted £65 a cube which was kiln dried. these boards on average are 1.5cu ft.

 

thx simon

597663d23af0f_20130306_164757copy.jpg.054f7fbb1d614b00ee1d120d99e81768.jpg

597663d238a54_20130306_164217copy.jpg.1959197373ba48547ef05c1ea4caf9ad.jpg

Edited by Big Beech
Link to comment
Share on other sites

Log in or register to remove this advert

They look nice boards Simon but knowing what oak like this dries like I think you'll get a lot of cracks and fissures develop as they dry - you always do!

 

 

£65-00 a cube - if these boards dry well then prob they would be worth that - but would you be able to sell them at that? Not sure as like everything it's finding a buyer.

 

 

:001_smile:

Link to comment
Share on other sites

They are nice boards and well sawn :D

 

The pinkish tinge is quite common when the oak reacts with air. It's not brown Oak, and it's not something to worry about as it fades to the same colour as any other Oak.

 

I would describe the boards are reasonably heavily pipped verging on burred. Pricing wise, I'd punt them at about £45 a cubic foot plus VAT. Whilst they are visually attractive, they are structurally flawed in places, and these defects only get worse with drying, not better. Get them sticked under cover, with no direct sunlight and a reasonable air flow. Leave them for about 18 months and if you wish to kiln them, do so at that point. Otherwise, shave about £10 off the cubic footage price and sell them air dried.

 

Jonathan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.