New Member & Alaskan saw questions

[Rhob the Log]

Great that you're enjoying the work. I've been milling up seasoned Oak in the local nature reserve for the past summer - 12 years on the ground and tough as old boots dropped in wet concrete...

 

I run a Stihl 088 with 47" bar and filing is....fun.... We're using an ms880 with a 36" bar and mill in the reserve as well. One thing I will suggest if you're looking for bars is to get the largest mill you can afford as anything over the 36" mill comes with an extra bracket which, conveniently, you can rig up at,say 25" inches, thus using your rails on smaller logs without running the chain through several more miles. Just remove the upright post and U-bolts and slot in closer to the powerhead. Rob also does upgrade rails to lengthen your mill though so no biggy if you underbuy size.

 

Penny for your thoughts....and hello. Just joined

[Rob D]

Welcome to the forum Rhob and good first post!

[Dan76]

Afternoon all.

 

Been reading through this thread and have decided that the Alaskan Mill should be purchased. By all accounts Rob D is the man for them, so will make contact with him and take it from there

[Rob D]

No prob Dan register in my site Chainsawbars ? bars, chains and chainsaw accessories then tell me and I can set your 10% discount. Rob

 

 

[Dan76]

No worries Rob, will do and cheers

[Rob D]

All set Dan

[Dan76]

Cool many thanks have just emailed you via your site with a few questions :biggrin

[Big Beech]

glad this post has been of use Dan!

 

simon

[Dan76]

Hi Simon,

Aye very useful, thank you. Have you had a chance to use you mill?

[Big Beech]

Hi Simon,

Aye very useful, thank you. Have you had a chance to use you mill?

 

certainly have recently. check the other threads under the alaskan sub heading