LOVELY little Dolmar

[shavey]

ok thanks for that i will change it back again i think tomorrow and give it a go

cheers:thumbup:

[TerryTibbs]

the opposite in fact! Dolly bar is 16", husq bars always blow up on me!

 

Husqvarna bars blow up/chip/tear themselves to pieces... FULL STOP!

Shocking they're even supplied with a pro saw!

[face cord]

Tempted to get one from germany:

 

Dolmar Profisäge PS-5105 C / 38 (0,325")

 

Dolmar Profisäge PS-5105 C / 38 (0,325") - MotorLand.net - Europas größter Motorgeräte-Shop

 

£413 seems a good price....

[MarkyD]

Been looking at that myself. Trouble is thay won't ship to the UK. Seems the same with others in Europe. Possible to do it using a reshipper like shipito but the cost adds up.

 

Just looking to see if anyone on german ebay will ship to uk and so far found one Kit with other bits (box etc ) comes at £523 delivered so there are those who will do it.

 

DOLMAR Motorsäge PS 5105 Plus Zubehör Plus Koffer | eBay

Edited March 7, 2013 by MarkyD

[TimberCutterDartmoor]

£311 from USA plus postage and import duty; works out at about £400.

[THE88MAN]

quick update on mine.its done 3 months work now (not every day).I had to break off the ally/resin cover on the h/l jets to retune it as it bogged on full throttle (guessing it don't like our fuel) now its run in it swaps between 13" and 15" bars and runs an 8 pin sprocket,its completely bonkers in a word.it has the snap of a husky 550 but bury it and it has the torque of a 560 or more! punches far above its weight for me.please please please start selling them here,no brainer makita

[shavey]

quick update on mine.its done 3 months work now (not every day).I had to break off the ally/resin cover on the h/l jets to retune it as it bogged on full throttle (guessing it don't like our fuel) now its run in it swaps between 13" and 15" bars and runs an 8 pin sprocket,its completely bonkers in a word.it has the snap of a husky 550 but bury it and it has the torque of a 560 or more! punches far above its weight for me.please please please start selling them here,no brainer makita

 

iam glad you like your'' hellfire missle'' there great i put a non cat muffler from a ps 5000 on mine even better come on makita sell sell sell and we would buy buy buy :thumbup::thumbup:

[THE88MAN]

iam glad you like your'' hellfire missle'' there great i put a non cat muffler from a ps 5000 on mine even better come on makita sell sell sell and we would buy buy buy :thumbup::thumbup:

I never get any work done though shavey.....cos all 3 of us stand around all day listening to the sexually bubbly tick over

where do I source said muffler?

[shavey]

i got the part number from parts spec for makita dcs 5000 non cat muffler then then opened the h jet up to compensate for bigger exhaust port and also you will find it will be cooler:thumbup:

[THE88MAN]

i got the part number from parts spec for makita dcs 5000 non cat muffler then then opened the h jet up to compensate for bigger exhaust port and also you will find it will be cooler:thumbup:

thanks I'll look it up,like it could be any cooler