Prices for biomass chipping

[shabz1978]

Hi all, I'm looking for someone to give me a quote for biomass chipping in Cumbria, a couple of hundred ton at a time? Anyone know how much I should be paying??

 

I haven't a clue about it and just need a rough idea. Feel free to pm me a price (preferably by the metre) if you don't want to write it here.

 

Thanks in advance!

[Hodge]

You should try billy Barden of Barden biomass, he has a web page. He had a big valtra and heizohack. He is based near Kendal. I don't have his number but he has a web site.

[elfinwood saws]

1000 pound a day, 25ton an hour, thats what we,ve been quoted.

[shabz1978]

Thanks very much lads, I'll get on to billy barden!

[jpbeaver]

07971 660794 or 015395 66073 Will Barden

[garetharb]

Hi all, I'm looking for someone to give me a quote for biomass chipping in Cumbria, a couple of hundred ton at a time? Anyone know how much I should be paying??

 

I haven't a clue about it and just need a rough idea. Feel free to pm me a price (preferably by the metre) if you don't want to write it here.

 

Thanks in advance!

 

hi Try David at Keighley Tree Services. He will be able to give you a quote and discuss things further if you want. David 07850631221

cheers gareth

[renewablejohn]

1000 pound a day, 25ton an hour, thats what we,ve been quoted.

 

 

I normally charge £250 per day plus fuel but work on 10 tonne per hour. Unfortunately Cumbria is a bit far as I normally do 25 mile radius from Bolton.

[elfinwood saws]

1000 pound a day, 25ton an hour, thats what we,ve been quoted.

 

I,d just like to point out this quote was not from Billy Barden it was someone in the Durham area.

[PhilBeech]

All completely irrelevant as it depends on the chipper used and the final grade of chip required.

 

Contact some of the suggestions above and get a feel for what you actually require. Theres a big difference between waste reduction and biomass production.

 

With the right chipper you should get your chipping done in 2 days by a 18" + chipper if it's all in one place and being blown into one pile. Keep the chipper standing or keep it moving and it will take longer.

 

I don't know of any contractors in Ireland sadly. You could try contacting: M Large.