Jump to content

Log in or register to remove this advert

Husqvarna 262xp chain oil consumption


chazzer
 Share

Recommended Posts

On a Husqvarna 262xp should the chain oil run out when the fuel runs out? i have the screw on mine all the way out and it doesn't even use half whats in the tank! The chain doesn't get overly hot. I haven't checked the filter yet but the bit where it comes out the hole is clear and so is the bar rails and hole although they seem very small compared to other bars?

Link to comment
Share on other sites

Log in or register to remove this advert

On a Husqvarna 262xp should the chain oil run out when the fuel runs out? i have the screw on mine all the way out and it doesn't even use half whats in the tank! The chain doesn't get overly hot. I haven't checked the filter yet but the bit where it comes out the hole is clear and so is the bar rails and hole although they seem very small compared to other bars?

 

Oilers are designed NOT to run out before the fuel so there is never a chance of running the chain dry . You should really fill the oil tank first then the fuel that way its 100% you will not run a chain dry .

Link to comment
Share on other sites

I know that but the oil used between fill ups is minuscule. I always fill both up at the same time and clean the filters just after lunch

 

OH ok sorry . Err maybe its not oiling properly . Have you run the saw flat out for a few seconds to see if its sprays on to a log cut face or similar ?

Link to comment
Share on other sites

the oilier is working fine now. it would oil for a bit as soon as you start it up but then it would stop so i pushed a needle through this hole which i assume to be the breather and its working again now!

 

O.K. Sorted . Well done . ! :thumbup:

Link to comment
Share on other sites

hello guys

have you checked to see if it as an adjustable oiler that you can turn up and down there is usually a little screw with an arrow either pointing to a - or+with this is turned down it will only use a small amount of oil?

this may help albert

Link to comment
Share on other sites

hello guys

have you checked to see if it as an adjustable oiler that you can turn up and down there is usually a little screw with an arrow either pointing to a - or+with this is turned down it will only use a small amount of oil?

this may help albert

 

 

I had it all the way out now with the breather unplugged its in a turn or so.

are you the same albe013 from youtube?

 

Charlie

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.