Jump to content

Log in or register to remove this advert

Reptile fencing


Lyn Ed
 Share

Recommended Posts

Log in or register to remove this advert

ive worked for knighton countryside management down coed darcy on the old BP oil refinery,they were putting up newt fencing,i was doing the tree and vegatation clearance,but i did have a peek

 

you can go into my friends list and fined mark gibbens (one of the directors)

to get to their site or just go to the site knighton countryside management

they are dorset based and look at some pics,to get the idea

 

the idea was dig a trench about 1ft deep knock pegs in about 4ft apart,then nail on a plastic sheet on the pegs and in the trench,backfill trench and place a few buckekts along the fence [in the ground]newts walk along the fence and fall in the bucket...bingo

 

they also place some squares of mat inside the fence and the newts go under then

 

hope this helps abit

 

martyn

 

 

IKMF, good lad :thumbup1:

 

Knighton as in the guys from Poole?

 

For an example of reptile fencing, the A338 into Bournemouth between Ringwood and Blackwater Junction is bordered by it. Unfortunately, whenever a car goes through it, noone ever repairs it and so it looks pretty tragic now.

Link to comment
Share on other sites

IKMF, good lad :thumbup1:

 

Knighton as in the guys from Poole?

 

For an example of reptile fencing, the A338 into Bournemouth between Ringwood and Blackwater Junction is bordered by it. Unfortunately, whenever a car goes through it, noone ever repairs it and so it looks pretty tragic now.

 

dorchester [piddlehinton]:thumbup:

 

IKMF my new passion:thumbup:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.