Jump to content

Log in or register to remove this advert

River bank job


irish surgeon
 Share

Recommended Posts

Hi all, just wanting your opinion on a job I have to look at where low lying branches have to be cut as part of a flood relief operation it stretches over 1k along a river bank with species such as sycamore and laylandii, approx 400 metres has a cattle field behind trees but the band of trees are tight and pretty dense with the farm owner only happy to open up 2-3 sections to bring branches out through, also the job stipulates that no branches can fall into river which is going to be tricky basically I am wondering has anyone on here done a similar job and what method was used, any ideas would be much appreciated. Cheers

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

I did this a few years ago. Crack Willows on the river bank. All the lowest limbs had to come off so we attached an old rope to each limb and to my Unimog, tensioned the rope, cut the branch and gunned the throttle to drag the limb out.

If you don't have a 4x4 a which will do it, just slower.

If retrieval of the branches from the water is tricky, put a pulley up the tree to stop the branch going in the water.

Link to comment
Share on other sites

Yes I have a holder tractor and 4 tonne winch but was also thinking of loadall and maybe extending boom out longside whatever tree is being cut attach rope, lift to tension, cut and bring extension back in. There is another guy who's pricing to do it with a barge with the intention of cutting branches to fall on barge and to off load them near the closest opening but I just can't see how that is going to work if there's a flow in the river.

Link to comment
Share on other sites

Check the spec, but I would interpret what you have written as you must remove all the branches out the river not letting them float away (not that no branches can enter the water at all), I have done work for EA on banksides and we have been ok to let stuff drop into the river and then pull it out, you can also install a floating boom across the river downstream if its not to big to catch most the twigs and sawdust if your that worried, I would spend more time making sure that you meet the specs on the other aspects re-havs, spill kits, environmental fuels and oils etc.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.