Jump to content

Log in or register to remove this advert

Any Idea's


Ian Flatters
 Share

Recommended Posts

It doesn't look like A. ostoyae or C. fusipes either, so without further information (photo's) on the gills, stem, smell, exact spore colour, etc. it's impossible to identify this fungus by one photo's alone.

 

I've just pulled one off the stem and taken some photo's but im now leaning toward Armillaria as some of the caps that are maturing have rings around them and the stems and gills are white. (i'll pop the pictures up later as i forgot my usb cable)

Link to comment
Share on other sites

Log in or register to remove this advert

I take it reduction (hammering is a good description !) is the only option Ian ? Im sure you will have considered the option of decompaction and trffic exclusion.

I do find it depressing when our work leads to a trail of destruction and tree care that it less than ideal - often through no fault our own !

Link to comment
Share on other sites

where is this ring supposed to be then? is it from when the fungi "pops" open?

 

You're looking at the downside of it. It's the yellowish ring torn from the cap's margin, that before covered the gills, with a yellow flocculate margin, which is characteristic of A. mellea.

Link to comment
Share on other sites

I take it reduction (hammering is a good description !) is the only option Ian ? Im sure you will have considered the option of decompaction and trffic exclusion.

I do find it depressing when our work leads to a trail of destruction and tree care that it less than ideal - often through no fault our own !

 

Financially its the best option, im sure the Armillaria is attacking the dying root atm. But with a lot of crown die back and believe me i've deadwooded this tree more than any others (8 times). The other reason is its had a limb failure on one side of the stem and on the other a large cavity, all at the same level. My concern is how structurally safe this section si as the is around 30% of cambium. If i fracture prune the crown and retrenchment prune (over x years) im hopeful that the tree will be able to stay. Thus still being habitat and an amenity.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.