Multitip Teeth

[Hodge]

I have a Rayco RG 13 MKII. It's the one with the 13 hp Honda engine. I fitted new bearings in a new Multitip cutting system wheel, I used it for the first time today on 2 18 inch birch stumps and 4 8 to 10 inch stumps in hour and a half, including loading up all the excess 18 inch stumps as they were quite high in the ground if you know what I mean, bet it was 18 inch hi covered in soil. The Mutltitip did the 8 inch in 4 mins..I tidied every bit of excess grindings. And had a cup of coffee, kit kat and a quick scan of the paper. The teeth were in good condition at the end of the grind.

[Hodge]

Here is a pic.

[nick channer]

I have a Rayco RG 13 MKII. It's the one with the 13 hp Honda engine. I fitted new bearings in a new Multitip cutting system wheel, I used it for the first time today on 2 18 inch birch stumps and 4 8 to 10 inch stumps in hour and a half, including loading up all the excess 18 inch stumps as they were quite high in the ground if you know what I mean, bet it was 18 inch hi covered in soil. The Mutltitip did the 8 inch in 4 mins..I tidied every bit of excess grindings. And had a cup of coffee, kit kat and a quick scan of the paper. The teeth were in good condition at the end of the grind.

 

i;ve got them on my predator... love the fact i can change all 6 of then in less than 10 mins... although it seems to work better by just changing 1 at time as it wears out... give the retainer a good few clouts with a big punch or lump steel bar then the allan key bolt comes out with your finger tips...

[Pat Ferrett]

I put the new cutter head and cutters on my 252 and its transformed the machine.

Dead easy to change the teeth, quicker and smoother grinding.

Im well chuffed

[Hodge]

Good to hear lads!!

[Ian C]

I have just fitted one to my Rayco 1625, not tried it yet but its got to be better than finger teeth.