re-tune huqavarna 357xp

[Cobbs tree&estate service]

I need to re-tune my huqavarna 357xp. I have in the passed re-tuned all of my saws but this one seems to be causing me a problem.

Could any one tell me what the factory settings are for my huqavarna 357xp (2006-2007). I have been looking online but cannot find it. The adjuster screws on this saw only seem to have about half a turns play on each.

[spudulike]

I need to re-tune my huqavarna 357xp. I have in the passed re-tuned all of my saws but this one seems to be causing me a problem.

Could any one tell me what the factory settings are for my huqavarna 357xp (2006-2007). I have been looking online but cannot find it. The adjuster screws on this saw only seem to have about half a turns play on each.

 

The H&L screws only have half a turn on them as they have limit caps on them, this is done so the uninitiated don't mess with settings they don't understand and mess them up - result of a weak H setting is seizure.

 

I don't know the reason for adjustment but if you are getting bogging in the mid range then it may be an airleak on the inlet carb boot or a crack around the impulse connector on the boot - both are very common:thumbdown:

 

Other weaknesses are the automatic decompressors on the EPA model!