What's on your bench today?

[spudulike]

Too much on this weekend - fixed Rich Rules MS200 carb followed by an elusive oiler problem on another MS200 traced back to a faulty oil pump.

 

Had a Jonsered 2045 in with a fuel problem - stripped the carb and readjusted.

 

I then started work on a Stihl 064 in for porting and poor starting, the cylinder has a bit of aluminium transfer - now sorted the middle picture shows the acid at work.

 

The piston was a bit scored and also had a chunk out of it where it had started melting during a small seize, have a new one on order and when this arrives, will start porting it. From what I have seen so far, the piston doesn't allow for much port widening - the inlet looks like it wil take more then the exhaust. Will rework the transfers a little, optimise the squish and do a muffler mod.

[burrell_]

pop up the 064 lol yeh :lol:

[spudulike]

pop up the 064 lol yeh :lol:

 

Good idea Martin, know anybody with a lathe:001_rolleyes:

[burrell_]

i no someone with a lathe but dont no anyone good with one :lol:

[spudulike]

i no someone with a lathe but dont no anyone good with one :lol:

 

Bit like your DIY as well - hows the paintig coming on:lol:

[burrell_]

it ent i keep helping people out at weekends :lol::lol:

[spudulike]

it ent i keep helping people out at weekends :lol::lol:

 

Get the crew round to yours - reckon they would make short work of your window frames:thumbup:

[burrell_]

:lol:im shore that will work mate

is it just the 357 this week end and the 200 pot

do the piston first do u want to put a gasket back in the pot

[spudulike]

:lol:im shore that will work mate

is it just the 357 this week end and the 200 pot

do the piston first do u want to put a gasket back in the pot

 

No, will use liquid gasket unless the squish is all wrong but can make gaskets in various thicknesses!

[Rich2484]

The parts have finally turned up for the quad today so will be fitting them on thursday. Then I can get the thing out of my way.

 

I have to say parcel force are the worst I have encounterd for delivering what should have been straight forward.

 

Oh well better late than never, can't wait to test it out..