Timberwolf shredder. Opinions please?

[Big 'Ammer]

As title, from people that have actually used one, please.

 

I am looking at a job where there will be a lot of shrub tops and trimmings, the sort of stuff that you would chuck into the hopper with a fork and will be bad to feed into a chipper.

 

I think this could be the right machine for the job, but have no experience of using one.

 

Feedback please, guys.

[Johny Walker]

we had 1, on demo ,it promtly got blocked, need feeding @ a steady pace, they dont like too wet waste either

worked ok on the dryer stuff,

[Big 'Ammer]

Cheers, Johnny.

 

keep 'em coming.

[Paul Jenks]

Are we talking shredder or chipper? and which model?

[Big 'Ammer]

Are we talking shredder or chipper? and which model?

 

Shredder. The tow behind one.

[Johny Walker]

its somthing i looked in to getting ,as all the crap would go thru,but wasnt sure on the quality of the chip/shreddings it would make,they seemed quite lumpy

[Big 'Ammer]

Did it reduce the volume of material much?

 

The only shredder I have used was a waste wacker, years ago, and it was poor.

 

It blocked up all the time and if you opened the aperture up it to stop this, it was little better than an elevator for loading the trailer!

[Johny Walker]

Did it reduce the volume of material much?

 

The only shredder I have used was a waste wacker' date=' years ago, and it was poor.

 

It blocked up all the time and if you opened the aperture up it to stop this, it was little better than an elevator for loading the trailer![/quote']

 

cant remember what the reduction rate was,get a demo of o/p,

[burrell_]

timberwolf shredder hire one once and all i would say is no no no no no no no and no bloked it up 2 many times ivy is great for bloking it up so is wet cony

it went ok when we put woody stuff through it

have u had a look at these i keep thinking about getting a demo at some point

SAELEN multi-vegetation chipper/shredder

[Big 'Ammer]

Cheers, burrell.

 

Who hires Saelens out in the north?