Bad timberwolf

[TREE-SURGEON-ESSEX]

Any one have or know where to get the exhuast for the 20-24hp honde engine, my one fell off today

 

Also both rollers stopped working and had to bypass using the red wires control box works fine what could it be

 

Thanks for any help

[timtree81]

try a schlech ,nothing falls off them

[Andy Collins]

try a schlech ,nothing falls off them

You just tempted fate you know:001_smile: doesnt exactly help the OP though

[tommer9]

Any Honda dealer of mowers etc etc should be able to get that exhaust, and if the control box works still then its very possiblt that a loose contact could be the problem. Ths is the joy of chippers- they vibrate soo much very little survives!

[TREE-SURGEON-ESSEX]

Could it be the no stress unit ? the little light works on it just cnt think what it is i did wiggle a wire and the rollers worked for a second ?.

[White Noise]

Could it be the no stress unit ? the little light works on it just cnt think what it is i did wiggle a wire and the rollers worked for a second ?.

 

I had condensation in mine . I blew it out with the air gun and sprayed in WD40

[geoff]

Take all the connections you can find/trace apart,clean them,vaseline them up & see if that sorts it,good luck mate.

[TREE-SURGEON-ESSEX]

Take all the connections you can find/trace apart,clean them,vaseline them up & see if that sorts it,good luck mate.

 

I shall try that mate cheers,

[geoff]

Check to see if this has its own earth too,that may need a clean up too.

[armchairarborist]

if the exhaust is stupid money, go to your local exhaust dealer (not the fastfit type) the older the better, i used to work at one and we made custom pipes for anything classic cars, kit cars, bikes, dragsters, generators and whatever came noisily through the door