Replacement bridge for petzl sequoia

[alex90]

A was hoping you guys would have some in formation on this or ideas.

 

I have a petzl sequoia harness and am wanting a longer bridge for it but also something that runs freely??

 

cheers alex

[Steve Bullman]

you could tie your own with some 10-11mm line, with a micro pulley mounted on it, that would be plenty smooth

[alex90]

what kind of knots would i use to tie into the harness rings.

 

Sorry for the questions it just my first harness and i'm still at college.

[Ben]

Fishermans

[Peter]

Get a narrow tape sling the right length, and a piece of 11mm rope to match, strip the cover off the rope and over the sling, and you have a super strong bridge with a wear resistant cover.

[Ben]

Get a narrow tape sling the right length, and a piece of 11mm rope to match, strip the cover off the rope and over the sling, and you have a super strong bridge with a wear resistant cover.

 

Great Idea.

[jpbeaver]

jamie could splice you 1 i'd of thought.

[Amelanchier]

Get a narrow tape sling the right length, and a piece of 11mm rope to match, strip the cover off the rope and over the sling, and you have a super strong bridge with a wear resistant cover.

 

ha sounds familiar...

[Peter]

ha sounds familiar...

 

Is that what you have on yours? I thought I'd seen one somewhere but I couldnt think whose it was.

 

Just made up a redi with 2 revolvers and the same sling and cover technique. Looks very smart. Will post some pics when I get a chance.

[Amelanchier]

Is that what you have on yours? I thought I'd seen one somewhere but I couldnt think whose it was.

 

Just made up a redi with 2 revolvers and the same sling and cover technique. Looks very smart. Will post some pics when I get a chance.

 

Yep twas me sir!!!

 

ooooh shiny stuff. What diameter sling?? Those little dyneema jobs would fit inside 8mm cord cover...