first day of garden blitz

[Robert_S]

:001_rolleyes: Edited July 17, 2010 by Robert_S
i answered before you answered my question so deleted this answer

[Stephen Blair]

Did you find it tipped ok mate? i have found in the past on other vehicles when the side/tailgate opens at the top some of the timber gets stuck it can be quite frustrating

 

it all depends in whats in it Robert, because i wanted the back lower than the front, when it hinges the top 8"s goes into the body, so if its full of timber then it will jam, chip should be ok though. I just craned the bigger stuff out coz i wanted it out the way on the stack. I will need to watch tipping lumps incase it comes back and catches the truck, but thats all easily avoidable if operated correctly, i usuallt tip loads out and reverse tight round at the same time to avoid thid:biggrin:

[Stephen Blair]

ha ha robert,i was answering ben i should of quoted but didnt lol

[pro bros]

is that a4ton or7ton truck ie what driving licence is required if you dont mind me asking as i used to have an mk4x4 with hiab operated through roof this was agri reg

[Stephen Blair]

10 tonner mate on AG.

[Stephen Blair]

[ame=http://www.youtube.com/watch?v=A-cug-xJPBY]YouTube - stump grinding[/ame]

[pro bros]

10 tonner mate on AG.

 

how did you get that or did it come ag reg like ours did cause the ministry insisted it was only for off road use ie red diesel anyway good on ye:thumbup:

[Stephen Blair]

i run mine on white, the guy before me registered it for Ag and did all the hoop jumping through.

[scottythepinetree]

The only thing I found a pain with the Greenmech's is how much stuff you have to take off to unblock them. Few other minor things that go wrong with every chipper I've ever used. Other than that they're a class bit of kit.

Like I said your staff are spoiled. If they ever go working for other companies they won't know what hit em.

[Stephen Blair]

why would you block it up? not being funny, modern chippers shouldnt block up unless someone isnt using them correctly. A common fault is users have the spout deflector to steep and the chip cant get out quick enough. The spout on mine comes off in jig time with 2 twiddilly things attached to nuts.