Help please, Husky 2100 part needed.

[Big 'Ammer]

I am after the front bar mount stud for a Husqvarna 2100 CD/XP

 

The part No. is 501 69 26-01

 

I got the back one, but the front one is apparantly out of stock and no longer made.

 

Any dealers on here got one gathering dust in their workshops?

 

Any one got a scrap saw?

 

Could anyone direct me to a site in the USA or Canada that might help?

 

Cheers peeps!

[robbo 110]

just a thought.... if you have the old one is there any local engineers near you that could make one??

[bareroots]

make me an offer on a 2100,

 

still runs,

 

tired of the vibrations.

[Big 'Ammer]

Thanks for the offer, but I don't want another one, just want to mend the one I've got to have as a standby large saw.

 

... and yeah, the vibes are bad!

 

... but the cutting performance is legendary!!

 

The stud, when it was available, cost about 4 quid.

 

I have rethreaded the old stud to 5/16" and put a 1/2" nut and washer on which works fine and is a usable solution.

 

The problem is that when someone else, however well meaning, decides to take the saw to bits to clean it, and mixes up the nuts...

[bareroots]

got a 20inch bar on mine... holy moly

 

However the breather melted one day and i've had to bodge something out of a bit of pipe with a screw in it.

[Big 'Ammer]

Mines got a 28" on it.

 

I have also got a 16" bar too!

[Big 'Ammer]

Bump!

 

Am still after a front bar stud.

 

Treequip's after some dogs.

 

Anyone got a scrap 2100 at the back of the shed?

[tree_beard]

Bump!

 

Am still after a front bar stud.

 

Treequip's after some dogs.

 

Anyone got a scrap 2100 at the back of the shed?

 

think there is a dead 285 under the bench at my local saw shop, will check next time i'm there...

[Big 'Ammer]

Cheers, much appreciated mate.

[tree_beard]

no probs, i do love a 2100...