Jump to content

Log in or register to remove this advert

What's there to know?


bareroots
 Share

Recommended Posts

Keen to learn from those more experinced then myself.

 

I've always climbed with blakes hitch and/or prussic. Establish an anchor and move down to work. Have a steel core strop for anchoring close in. Occaisionally using the other end of the rope when needing a lateral support. That's about all I know.

 

You old dogs... tutor me in the ways of righteousness.:confused1:

Link to comment
Share on other sites

Log in or register to remove this advert

im not old, or experienced, but...

 

a steel core/ wirecore/ flipline is most commonly used when cutting down sections of a straight stem- the line needs to be strong, just in case, as you are cutting close to it.

 

for moving around the crown of a tree the wirecore can be replaced with a more flexible strop/ lanyard/ work positioning strop, which is basically a short climbing line, usually at least 3 metres long, set up with your favourite friction hitch etc... this strop can be used to gain a better work position, to prevent swinging, or as a temorary secondary anchor point.

 

as far as friction hitches go, just type "friction hitch" into the search option, and be prepared to learn some new knots!

 

hope this helps

Link to comment
Share on other sites

as far as friction hitches go, just type "friction hitch" into the search option, and be prepared to learn some new knots!

 

hope this helps

 

With respect Bareroots, this is without doubt the best advice you will receive.

This generic type question comes up repeatedly, and as such won't get the juices flowing as much as you would like,

 

However, as above, just use the search option, read the threads & ask away on the those.

 

People here are only to happy to share there experience/tips.

 

 

Good luck, enjoy the trip :001_smile:

 

 

 

 

.

Link to comment
Share on other sites

Keen to learn from those more experinced then myself.

 

I've always climbed with blakes hitch and/or prussic. Establish an anchor and move down to work. Have a steel core strop for anchoring close in. Occaisionally using the other end of the rope when needing a lateral support. That's about all I know.

 

You old dogs... tutor me in the ways of righteousness.:confused1:

 

As same as Monkey, but also will add, dont let these gear junkies cloud your mind with their shiny ting lust! keep it simple, uncomplicated, less links in your chain, more reliable and less to think about other than the task at hand!:thumbup:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.