6 inch tracked chippers

[markieg31]

Yes I have used a 230 sometime ago and agreed it was quite an improvement in the hopper and feed roller area, the 150 has quite a narrow hopper as it leads to.the rollers. The biggest gripe about a 150 is the god forsaken bearings and having to take it all apart to replace, that and my track base is pretty well past it. 

Edited 9 hours ago by markieg31

[josharb87]

When employed we had the 6inch safe track, Isuzu motor, great wee machine, far better than a 150. 
 

im assuming whatever you’re looking at you’ll want varitrack? 
 

 

[Jase hutch]

21 minutes ago, josharb87 said:

When employed we had the 6inch safe track, Isuzu motor, great wee machine, far better than a 150. 
 

im assuming whatever you’re looking at you’ll want varitrack? 
 

 

Sounds like the 16-23 SafeTrack  ?

Unfortunately no longer in production due to the engine emissions regs , a brilliant chipper if you can track one down although most owners tended to keep hold of them.

I agree in it being potentially better than the AT150 which had a fixed track base.

The Tracked EVO 165 is a very capable 6" machine.

[josharb87]

Yes that’s right, 16-23. Light, agile and good performance

 

i meant the tw150