Homemade rack /table for feeding firewood processor for kinked lengths of wood

[cessna]

Have any of you made a home made feed rack/table that will handle slightly kinked 2.3 + lengths  of wood. Having just had a hernia operation,and recovering from it I don't wish to be doing  heavy lifting next log season ,so was considering making a log rack to  feed my old Japa 2100 firewood processor.  Any hydraulic  motor power for the  log rack would have to come from the tractor hydraulics.  So any info/pics  of what you have made would be much appreciated. I am only a small producer doing about  300cu mtrs of logs a season so not wishing to spend much money on the rack, I see some manufactured  ones are very pricey and sophisticated for my requirements.      

Edited May 15, 2022 by cessna

[Billhook]

 

[Billhook]

I made this one from scrap in the yard

Load it with the Teleporter and the logs take very little effort to move sideways in the boat rollers.  Will cope with bent logs quite well

 

 

[Butchers Block]

We have a kellfri hydraulic log deck available, little used £600.

[Stihl1345]

We have a kellfri hydraulic log deck available, little used £600.

Where are you located?

[Butchers Block]

Nottinghamshire