Jump to content

Log in or register to remove this advert

Old school ....


bmp01
 Share

Recommended Posts

Log in or register to remove this advert

Very simple thing to do on those if you didn't already know is disconnect the lead to points form stop switch, remove coil and fit a coil from say a 6800, this is the stand alone type, no need for trigger, it's in the coil! connect the cut of wire from the switch and away to go, straight swap does away with points and runs better. I have used many cheap Chinese coils for this swap, only because of cost and as yet no problems with any. Points are ok, but prefer hassle free coil set up. Let me know if you need a link. Nice looking 112 by the way😉

  • Like 1
Link to comment
Share on other sites

10 hours ago, Fatboy2017 said:

Very simple thing to do on those if you didn't already know is disconnect the lead to points form stop switch, remove coil and fit a coil from say a 6800, this is the stand alone type, no need for trigger, it's in the coil! connect the cut of wire from the switch and away to go, straight swap does away with points and runs better. I have used many cheap Chinese coils for this swap, only because of cost and as yet no problems with any. Points are ok, but prefer hassle free coil set up. Let me know if you need a link. Nice looking 112 by the way😉

Thanks for that. I got a sniff of the coil swap after a bit of goggling - seems like the 112 was upgraded to 'coil only' later in its production run. I think deleting the points is the obvious thing to do with it so any experience would be a great help.

Saw is in very good condition - I think it has had its problems, so probably stored for most of its life. It does now run, but behaves like it has an air leak so I'm being a bit cautious with it. Also signs of previous tinkering, gets the alarm bells going....

 

Thanks again.

 

 

Edited by bmp01
Correction
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.