6 way diverter valve help and how to change hyd circuit over from hammer?!

[swinny]

Hi all, in a bit of a pickle and need a bit of direction if you can please? 

 

I've fitted a 6 way diverter valve to my aux circuit to run a grab and rotator.... currently with having done nothing to change hyd setting I have a functioning grab 😀

 

My question is should it actually work if oil should only flow one way on hammer setting? Anyhow it does..... 

 

Just spent the last 2-3 hours messing about running wires etc to the solenoid so I could try rotate function.... nothing! Bugger.... then as I was giving up I could try the grab then flick my switch and the rotator  would move a few degree and stop..... 

 

I'm wondering if I've got the diverter piped right? .

 

I think I have and that it needs the circuit changing over from hammer to 2 way?

 

Not a bloody clue where it is though 😞 aanyone know? Dont know why it can't be easy to spot and get too....

 

Many thanks for your help. 

 

Chris

[Johny Walker]

There's a nut that you turn from hammer to grab it will be in the cab some were under seat or to side 

[Johny Walker]

Have you checked the manual ???