084 air filter

[billpierce]

This filter fit for the bin? Looks like there may have been some felt on this at some point? Or its very clogged and I blew it off with airline? Anyone know? Is it just supposed to be mesh or mesh and finer stuff? Thanks

 

Sent from my C6603 using Arbtalk mobile app

[billpierce]

Also I got some issue with my dawgs. Only one type listed on parts diagram but I got 1 huge and 1 normal size?this is unacceptable (saw came like this) so anyone know which part no the big one is?

 

Sent from my C6603 using Arbtalk mobile app

[billpierce]

....and what sort of chain catcher should it have? L shaped one or straight across type?

 

Sent from my C6603 using Arbtalk mobile app

[Richard Thompson]

It looks too me that it should have a finer velvet type of fuzz on the filter .

When I had a cheap and cheerful Chinese saw I replaced the damaged mesh with some tights material as I couldn't find a new filter to replace it.

[spudulike]

The mesh should have a fine felt type cover on it. The chain catcher will fit between the dogs and is basically a bolt and roller fitted to the dog on the side cover that slots in to the hole on new dog you are likely to fit on to the saw itself.

[spudulike]

I believe the dog is Part - 1124 664 0501

[billpierce]

I believe the dog is Part - 1124 664 0501

Thanks, wasn't sure If that was the big or little one.