timberwolf 150dhb stress control trouble

[Ilovearb]

I have a timberwolf 150dhb 2007, and the stress control isn't working properly.

 

basically its not kiciking in until to late causing it to stall the machine sometimes

 

Does anyone have any answers?

 

Thanks in advance

Edited November 17, 2016 by Ilovearb

[Mick Dempsey]

Describe the problem.

[Starscream]

Describe the problem.

 

[Ilovearb]

Describe the problem.

 

basically its not kiciking in until to late causing it to stall the machine sometimes

 

thanks

[Mick Dempsey]

Belts at correct tension?

[Ilovearb]

Belts at correct tension?

 

i shall check tomorrow

 

its had non recently... maybe the need replacing??

[Benny4817]

Without checking up i think the Speed sensor takes the Alternator speed to judge when to kick in the No stress mines a 2009 and did the same was kicking in slow but adjusted the Alternater belt to the corrct tension and Kicks on on time everytime also check tension of drive belts as ever little will help

if you have a seperate sensor on the flywheel etc then clean and adjust gap on that also it will be either alternater pick up or flywheel sensor

Edited November 17, 2016 by Benny4817
spelling

[Mick Dempsey]

You have three belts turning the flywheel. They should be nice and tight. Adjusting them is child's play.

[Ilovearb]

great thanks