Jump to content

Log in or register to remove this advert

Jmill

Member
  • Posts

    30
  • Joined

  • Last visited

Everything posted by Jmill

  1. Hello, trying to decide on a new truck. Thinking of crew cab and trailer combo but the weight of loaded truck and trailer plus weight of trailer is confusing to say the least!!! I passed my test in 2005 so I understand I can pull 3.5 tonne plus 750 kg? But how heavy is the average trailer?? Is there anyone else out there more knowledgeable than me out there....... Can't be hard
  2. Are single wheel axles any good for tree work? Only ever had and seen doubles. Anyone worked with one?
  3. Hello again, in my quest for a new truck I'm encountering some bargain sprinters! Anybody know how they go as a tree wagon? Don't see many using them for our kind of work. What's the deal with them?
  4. Was thinking 3.5 tonner really, but I do like the landys too.
  5. Also while I'm here can anyone give some obvious pros and cons of landy tippers? Seen a few advertised, just wondered why you don't see more of them. Loading space and fuel are the main draw backs I'm guessing? They look great though!
  6. Hello again. Feel like I'm going bananas looking at endless trucks on Gumtree, eBay ect..... Decided that £5500 is absolute upper limit, and was wondering if anyone has for sale or knows of any gooduns out there I might not have seen? Live on the Isle of Wight but obviously prepared to travel most distances for the right truck.
  7. Jmill

    New truck info

    Thanks for all the help. Transits really divide opinion, so still not decided yet. It seems I will get some good truck though for my money.
  8. Jmill

    New truck info

    All very helpful, thanks. With another transit, would you guys recommend an older one with low miles or newer model with higher mileage? Also for a model between `05 and '07, how many miles are they good for? Thanks again
  9. Jmill

    New truck info

    Are trannys more prone to rust or are they all as bad? Mine has just fallen apart, the engine will go on and on. Done nearly 200k.dont want another one with rust issues
  10. Hello people. Just got the mot quote for my 1996 transit tipper.......... And it's time to say goodbye to her. Rusting away! I've no clue about vehicles, I have to be honest, and was wondering what type or make or models to go for or avoid?!? I'm shopping in the £3.500—£4.000 mark. Not great I know but any help would be gratefully received
  11. Thanks a lot everyone....... Lots of ideas, I'm going to have a look at what I can get on the net and get spraying!
  12. Hello, just got hold of a bit of yard space and need to clear it of weeds. The nettles are waist /chest high!!! I want to get some herbicide to spray and kill the buggers............. What's the strongest stuff I can get my hands on in the UK?? Glyphosate based stuff like roundup seems to be all I can get. Is It going to do the job? I've read about some other stuff I'd have to bring in from USA that would get rid of everything that grows for a year or more! Sounds great but banned over here. Any ideas welcome....... As whatever I do I'm sure they're going to come straight back! Thanks
  13. I'm on the island mate. Pm sent. Cheers
  14. Jmill

    Vices

    Thanks a lot! The ones on ebay you linked look a little old, is it easy enough to bring them back to life with some cleaning and greasing?? If so then they look a bargain compared to other prices!!
  15. Jmill

    Vices

    Hello, just getting into milling and woodwork. Slowly buying bits and pieces for a workshop. Yesterday was lucky enough to be given two great woodworking benches. Only they have no vices on them, i'm going to buy them but apparently there is more to vices than I realised. Can anyone tell me what type of vice I need to fix on my benches. Do I need two or more? Record vices in all numbers or models seem good. But what are the numbers?? Thanks for any advice
  16. Thanks a lot for your response mate. I've got to be honest..... I don't really understand it but I'm sure that's me not you. Just one question.... What is a shim or shimming? Sorry but I've no idea! Haha cheers again,
  17. Hello, after successfully milling my first lot of timber, I was wondering what is the best way of getting these buggers flat and usable once dry? Obviously a planer thicknesser sounds like the way but without access to one can i use an electric power planer without losing all my thickness? Or is it hand plane all the way!!???!
  18. Last of my session!! Small piece of yew looks great. Pics don't really show the colours. I know the stacking is shoddy, running out of time and light. Busy for 3 weeks solid now. Gutted. Can't mill again till April!
  19. Also..... Got some pine butt's kicking round my yard. Not sure exact type, but is it worth a tickle with the mill??
  20. Brilliant. Thanks for all the advice! I've saved the biggest straightest piece for tomorrow. I want to cut it into actual boards, if you catch my drift? Rather than through and through, I've seen a vid where they cut the top cut then the bottom cut, then a new top cut to create 3 flat sides!! Then through and through, creating boards. God knows how you make it square! I'll show you how it went tomorrow! Cheers again
  21. Ok cool, i wasn't sure if the stickering was right? What's the best thickness do you think? I did three butt's in 1.5 days. So not all that productive time wise but definitely faster now as I really did make it up!!! The first cut took me a long time to set up and I'm sure there must be a better way than how I bodged it! But it turned out pretty good anyhoo. Thanks. I'll go again tomorrow and post more pics
  22. Safe to say I had a great day!! Hard work, but worth the toil. Not sure what everyone else thinks of the results but I am well chuffed considering I pretty much had no idea what to do! Thanks to people on here who post things about milling, I learned all I needed to discover an addictive new hobby! Cheers
  23. Hello. I'm itching to get out and mill my first timber having purchased the whole set up recently! Looks like Thursday will be my opportunity, so i was wondering if there is any definitive video or YouTube link I could see on setting up first cuts and any other little tips I wouldn't know about, being a complete novice! Thanks in advance, I'll post my in at the deep end attempt at milling regardless, and let you all rip me apart!! Hahahaha
  24. Thanks for everyone's input, i'm going to try milling some and seeing how it goes. I've sure got a sh#$load of chopping boards out there! It will be my first milling job! After that 2big yews! I'll try and post some pics. Thanks
  25. Just wanted to know if Holme Oaks are worth milling? I've got plenty of straight butt's but not heard of many people milling them?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.