jacko 10
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by jacko 10
-
id do the same as agg221 take the top off with the mill then set up for the mini mill but find something to fit inside the mini mill u may have to move the handle and re drill. it must b a good fit i use a metal rail this gets rid of any warp problems as your mini mill sits on the log not on the mini mill rails (6 x1 etc) also easier to set up not as much messing about measuring just mark size of cut place chain next to mark and screw down move mill to other end screw down and cut hope that helps
-
hi i would also be interested to hear more about your system but im also not sure about how the water heating bit works have you used this to dry other products -
very nice
-
i had a problem like this i think your guide rail board is warped or cupped
-
what size timber have you got the mini mill rails fitted to and have they been on it for a while
-
thank you
-
iv seen a post about a machine that turns brash into small firewood but can't find it again it wasn't long ago can anyone tell me where it is
-
is it the same all the way down the cut
-
hello rhob the log if u make that rail system on stands at each end how will u get the chainsaw mill on it without taking it to bits every time i thought about making one to do 6m oak beams for a garage i made but did them on a woodmizer in the end i made the rest with chainsaw mill
-
its a 070 ive done abit of work to it but not much runs ok
-
some nice milling everyone. some of what i did today a small bit of yew and a slab of beech i made into a table top [/ATTACH][/ATTACH]
-
[/ATTACH][/ATTACH][/ATTACH][/ATTACH] Thanks for all your advice ive cross cut it and taken a few pics for u to look at to see what u think
-
if i can get it out of the field i will if it ever stops raining . Its 30" wide going down to about 18" and about 12m long im not sure how thick to make the slabs ive been told it can fall apart if to thin when dried
-
hello everyone im looking for some advice about chainsaw milling bog oak its been out of the ground about 6 years but not undercover can it b done
