C.J

ye i switched to a different saw, what is the impulse line?

thanks carl

Ever wondered how fuel gets to the carburettor with out a fuel pump ?

When the piston goes down it creates pressure in the crankcase which should be airtight . This impulse is fed to the carburettor via an impulse line(small rubber hose) or a second small chamber inside the inlet manifold rubber boot . The impulse moves the diaphragm (inside the carburettor) up and down which pumps the fuel.

This it ? part no 395252

Its 2 stroke but it isn't 4 mix:thumbup:

I've had a look at the beaver spec and flow is only 20 litres/min.

With a typical 12 tonne splitter I'm guessing a cycle time of 15-20 seconds.

Its going to be a bit slow.

Jeremy Corbin's brother Pier's Corbin has his own weather forecasting site..

 

Recons he gets better results with his forecasts than the MET, trouble is, you have to pay to see em..

 

Welcome

 

I wouldn't trust any of em myself... but I did notice one thing on Corbins site, according to him, the gulf stream has been more wavy over the past thirty years.

which made me wonder, the gulf stream might be right over London one day, gone the next..

Gone with any chance of snow to boot... who said you're better off voting on the weather?..

You are confusing your Gulf stream with the Jet stream.

The Gulf stream is a warm water current that flows from Florida to Iceland.

The Jet stream is a fast air current that brings us storms across the Atlantic.

Tractor hydraulics vary between 175 and 210 Bar.

125 Bar would reduce your 12 tonnes down to about 7

Check that you have fitted the correct new chain.

What about the 880 mate?

875 loader is more likely to have 3 cylinder sub frame/brackets.

Also a massey 550 tractor should have the same bolt spacings.

You don't see many 360's about so you are unlikely to see a loader advertised to fit one.

I think the more popular 240 would have the same hole spacings and would use the same sub frame.

I believe the MF80 loader was available with a 3 cylinder sub frame.

Have you tried turning down your amps and going slower?

Amps up going down.

Amps down going up.

Anyone who knows anything about welding will tell you 6013 is also available as mig wire or tig filler.

 

Since you obviously know more about welding than treequip I'll leave you too it.

Good job I didn't offer any advice then.

These days I just lay it flat with the telehandler.

Back to the O.P, up or down ?

I wouldn't want to take any advice off anyone that didn't know that 6013 is a mild steel "stick " electrode.

Ex or inc the vodka & tonic?

43.77 with 5% VAT

Mitchell & Webber(01752 845660) might be more competitive for you ,nearer Plymouth.

Watsons 41.69 for 900 today,Mole valley were 44 ish

Joe Turner is your best bet.

Or Taylor Ag - Bomford and McConnell

I've also heard they don't use the same nest twice.

Don't leave the light on ,when you go out , if you have glass in your door, or they'll come in with you

I think I read its the redundant drones that come to the window this time of year so may not be able to sting.

2000kg payload to 4 meters.

There is a PDF online,search for Trima professional and it's on C-F-S website.

55p/mile

A Vegan minister of AG is enough to give us livestock farmers nightmares.

And also Vice president of the league against cruel sports.

There must be millions of Labour supporters , that eat meat,shoot or fish , and won't want her in charge of DEFRA.:confused1:

Haha! Not a saw mate...

What are the blade lengths for the Hibiki ? and how many teeth per inch ?

So you bought a MS181 - standard bar & chain ? or did you go for the 1/4" rollamatic mini ?

Surely the 365 is £450 + VAT = £540

Are you VAT registered ?

What's a timber fly is it similar to a woodworm?

Mendip dialect (Jon)

timber fly = wood fairy (log thief)