Jonny Burch
-
Posts
768 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Jonny Burch
-
Cheers Dave I'll have another look today [emoji106]🏻 Sent from my iPhone using Arbtalk
-
Evening all! Getting a new hydraulic splitter (?) this week so thought I'd change the hydraulic filter and oils also. I know it needs to be SAE 10 and can see where the filter is in the hydraulic tank. Is it as simple as replace filter and top right up with oil? I can't see any markings on the hyd tank. Thankyou as always for any advice Jonny Sent from my iPhone using Arbtalk
-
Bob, if you're reading this can you dig out that "banana box" please! [emoji106]🏻 Sent from my iPhone using Arbtalk
-
Ok, I'll call Price's in the morning for din plates. [emoji106]🏻 Sent from my iPhone using Arbtalk
-
Evening all Thinking of putting the chipper on the front of the mog. Question is... what's the best way? Am I restricted to front linkage or can I use a din plate? Aspen Bob will sell me front linkage (he doesn't know that yet!) if that's what's needed I know I'd be better off getting a ducker but money just not there for one at present. Thankyou in advance Jonny Sent from my iPhone using Arbtalk
-
Yep, that's the price I paid! Sent from my iPhone using Arbtalk
-
Yes Dave. Might have been a bit of a hole in a pipe I hadn't seen. When filling the system from the garage compressor (drivers side tank), I noticed it when I turned the compressor off. Still.. learned all about the air dryer etc etc and now have meths in there instead of old sludge. All the air tank/lines seem a lot happier! Sent from my iPhone using Arbtalk
-
Went to see Bob and Mick to get the pin out.... Bob and Mick won Sent from my iPhone using Arbtalk
-
The pin ain't budging! As we think the ram might be slightly bent it's getting cut off later! Then shiny new rams with shiny (expensive) U bolts going on! Sent from my iPhone using Arbtalk
-
-
And went to move the mog today and for whatever reason the air handbrake wouldn't release!! Builds air to 6 on the gauge and that's it. Mog is being a bit of a pickle at the minute!! Typically it was blocking the tractor in that had to get out and work today!
-
Cheers Duncan but already ordered one today fro A C price. Also ordered 2 new u bolts. £30 for the pin and £115(!!!) per u bolt. Got two new rams for £750
-
Cheers Mike! Yep, tried heating it up but will weld something on it tonight [emoji106]🏻 Sent from my iPhone using Arbtalk
-
Make sure your phone is charged Bob. I'll be calling you tomorrow! [emoji23] Sent from my iPhone using Arbtalk
-
Hi Mike The pin that's on the piston end Sent from my iPhone using Arbtalk
-
Got one of the ram pins out but ram with the broken u bolts pin won't budge!! Luckily there's 2 places nearby that can repair rams Been a good day otherwise.... Not! Lol Sent from my iPhone using Arbtalk
-
Nice one! Just been quoted £52.50 plus vat for a u bolt!! Sent from my iPhone using Arbtalk
-
The U bolts on one of the rams decided to give up the other day and I'd like to get both rams serviced/replaced as there has been issues with these before. Could anyone tell me where I might be able to source a new pair please? Many thanks Jonny Sent from my iPhone using Arbtalk
-
Went to see Bob the Mog and Mick Dundee to get some of the old U bolts off the Mog. Got the ram off now just got to get it fixed Hopefully going to get a new tipping body made by B&M too! Sent from my iPhone using Arbtalk
-
One of the fields almost done. Yes there's John Deere power harrowing Yes there's a unimog that should be doing it Yes there's a unimog in the top corner that decided it didn't want one of the linkage rams on it anymore Yes it'll be back power harrowing once fixed
-
Haha! I probably could! Sent from my iPhone using Arbtalk
-
Haha it's in the garage, I'll drop it back with the ibc container this week! Sent from my iPhone using Arbtalk
-
Our 7.5 came with the tool locker and it also has the bit in front for rakes, cones, fuel etc. Admittedly I've still not got round to painting over that horrible yellow yet! Sent from my iPhone using Arbtalk
-
Nice one, thankyou Sent from my iPhone using Arbtalk
-
Is that the same stuff as the pic I've just posted? If not then I'll call Price's tomorrow [emoji106]🏻 Sent from my iPhone using Arbtalk
