ledders666

Its like advertising something in the trade it, and you get a text asking you to ring them? if you want it you chase it up. And as said before shows your keen, willing to communicate, and use initiative

http://www.arborshop.eu/en/publications-page-3.html

Try that, i think its the one you mean. there is a couple o pruning books on this site.

Hope it helps

It is available somewhere, a company im doing work for has it, the superviser did say it took a while getting it though. Im Down for then this wednesday ill see if i can find out where he got it from.

ace thanks ill give one a go

Could any body recommend a good company to send my timberwolf blades of to for sharpening please

i'd highly recomend these

Tree surgeons Climbing irons/spikes on eBay (end time 09-May-10 17:00:23 BST)

i thinkyour price is good, sounds like your the same as me i mostly do domestic work, with a standard rate of 350 for 2 poeple and chipper 8 hours a day, give or take some depending on the job. Somepoeple are very happy, others keep going till they find someone to do it for less. dont worry about it, cause there isnt much we can do.

You'll look like a cyclist in that mate.

atleast a proffesional cyclist:001_tongue:

Maybe this is the type of hi-viz t-shirt you are looking for? It's also available in hi-viz orange........

 

Stretch-Air Climbing Shirt | Hi Viz Yellow

yeah that the sort of thing im after, Quite pricey though ill have to save some pennies

well i rang stihl and he gave me a part number for a heavy duty filter its the same but with a extra foam bit around the outside as someone mentioned above. No freebeies though:thumbdown:

looks swish, i have the same problem, where did you get that from?

Does any body know if you can get, and if so where, a breathable hi vis t shirt, I currently use a helly hanson dry. Which is exellent for keeping cool, but i am after a hi vis one of the same material so i dont have to wear a vest over it. Thanks

thanks for the advice guys. It wasn't bad on the outside of the filter ill double check for cracks and the seal. its pretty new though hasn't had a chance to wear really and i keep on top of the maintenance. Ill try again if not get in touch with stihl. thanks

I just cleaned out my ms 460, which is regulary cleaned (every2-3uses) and i took off the air filter and was suprised to see how dirty it was behind. Does anybody else have this poroblem. If so do you know if it is faulty or just how this saw works? Thanks

Im looking at getting a pair, there advertised as type A, but i was wandering if they also cover the rear lower leg as well for climbing. So i was hoping someone could tell me. Thanks

Out of interest who is converting the truck for you im thinking of doing it to my ranger? thanks

Im doing and so is my friend who is in the same position, where are you thinking of doing it to? I would go for it, the only way you'll really know. I would imagine a lot of after work studying though so depends how much you want it its never going to be a walk in the the park

easy just, tilt the camera a little, same as making it look like i can climb up a 'vertical' wall

very interested however its a four hour drive, how many days do you have? may be worth it dpending on wage?

fordson super major with 2 speed cooks winch,

this old girl has been in the family for roughly 40 years

When i first saw that i did think you had just pulled it out of that water behind:001_tt2:

Seen it advertised as trainee arborist on horticulture week, what a cracking place to work

I where still type c. However when im doing silky pruning i where some nice cool cotton dickies combats, makes you keep a eye out where your legs are more, knowing there not protected even against a wee harmles handsaw

hope this shows it better

that looks like the best as i could make one, maybe with three holes in it. It is dam boring filling them up, so i started doing it with a beer and a radio in the evening. Much better

Great bench. I have made a few benches similar to this and they do a great job of showing off the wood without taking too much time.

 

Nice!

would you have ant rought plans on how to make one? i'd love to give it a go. I have the 25" mill on my ms460 all i've done with it so far is make blanks for wood turning so fancy something a little more exiteing.

Thanks

Does anybody use the above prussik cord? Im looking at getting some, there is a big price difference between this and others. Does anybody think it is or isn't worth it?