Busy Daddy

just found out that when it fell out of the pickup and hit the ground it exploded there was a big bang

Highways are after them as well , they left a mark in the road when it dropped off , and they didn't bother to cone the area of bad lads

They could of got done for fly tipping

The local coop got ram raided the other night , they got away with the cash machine, but unfortunately didn't tie it on properly a mile down the road it fell of the back of the pickup

Really they should have taken the extra 15mins and tied it down properly and this wouldn't of happened

A mate of mine got raided last week nearly all his gear nicked they even took his rubbish bin and a seat

Most noticeably an electric posch log splitter if any one sees it advertised

Ive not heard much bad about them

had a good look at the trailer it looked very well made

As with all machinery you need a good dealer and I can recommend Brian for that

They have a good range of valtras in at the moment and are going to put a stall together for the apf

So please give them a call mention arbtalk and you may get a discount

I found the best speed to run a heizohack at is 700rpm this gives a very good quality chip , if you rev it too high with a powerfull tractor the chips cant get out of the sieve quick enough and this will cause a lot more fines

Using the 1000 pto you should have the tractor running around 1500 rpm which should be where your maximum torque is you will get good chip and use a lot less fuel

Heads up , a new junkkari dealer in north Yorkshire

Brian Robinson of North Cowton Valtra dealer is now selling a range of log splitters and firewood processers , and the full range of junkkari chippers and cranes

very similar I googled biofuelwatch maps

I just found this on the net but don't know how to link it

map of uk biomass power stations biofuelswatch

It gives all present , proposed and shut down biomass power stations

Not all or woodchip but will give you an idea of where they are

Just found that an average boat holds 50,000 cube of chip

I haven't found any prices yet

Does anyone know what sort of quality of chip these power stations use

Or is it the same as a smaller unit G30 G50

and how dry ?

Don't know , everyone seems worried about how long we can last before we run out

There was no mention in the bit I read about any percentage from the uk

How much will it cost to get a tonne of chip from the good old USA to teeside , it will be built right on the rivers edge not far from the current biomass plant , which I was told from a farmer who I chip for not more than 5 miles from the biomass powewr plant told me they have a massive amount of timber in stock and it is starting to rot .

Maybe this is why stobbarts have slowed down buying chip in

Just read that the MGT power station at teeside has just passed the last hurdle before construction starts on the 300mw plant

It will use an estimated 2.5 million tonnes of woodchip

Good I here you ask , maybe another outlet for our forestry , but no it is to be sourced from the US and Europe no mention of british woodchip

Thanks I will let him know

One of my customers is looking to sell 200 plus tonnes of dried g30 spec woodchip to make space to put some extra conveyers in

He is based in the north Yorkshire area if anyone is interested could you pm me

Thankyou

yes and maybe running a bit rich or lean , how long would a petrol car run for if the mix wasn't correct or even one of your huskies Mr gray

That's a lot of ash

Someone was telling me that the engine on these boilers only lasts 3 years then they have to replace or rebuild it

Havent got a clue about that , are you wanting to get into charcoal as well

Never thought of that , I will ask

John morning hows the heizohack going

Just found the specs for the boiler 15mm to 55mm zero fines so it will need sieving

There is another one localy that is going in that will run on pellets

These 2 are already getting installed , I will try and find out more

I have just been asked to produce this large size of chip

Thanks I haven't been given the specs yet

Id like to know if anyone runs a chp

The idea is to run the gases through an engine and generator to produce the electric , just wondering what he chip quality / mc have to be to produce the correct gases

Hey grey thought you were looking at winch porn tonight

Yes or we will be doing another 2000 tons a year so leave some days spare in January when it starts production

Thanks

This guy is looking supply 2 large chp units

I am hoping that my heizohack with a G 100 screen will do it