Arb Surplus

SIP Protection Hi Viz Orange Chainsaw Trousers - Regular Fit (Type "C") - Large Long Leg The SIP Protection Hi-Viz Orange Chainsaw Trousers in regular-fit fluorescent orange combine maximum visibility with full-leg Type C chainsaw protection. Featuring a six-layer Dyneema® inlay, reinforced Cordura® shell, and reflective accents, these trousers ensure safety and compliance on every job. Key Features Six-layer Dyneema® protective inlay for Type C chainsaw cut resistance Reinforced Cordura® nylon outer shell with Teflon™ finish for water and dirt repellence Elasticated waistband with belt loops and suspenders attachment points Inside leg length: 82 cm Exterior Features Front zip fly with hook & eye and press-stud closure Two inset front pockets with secure closures One thigh pocket under flap with zip closure Triple-needle stitching on all major seams for durability Materials Main fabric: 100% Cordura® nylon (± 250 g/m²) with Teflon™ water- and dirt-repellent finish Protective inlay: six-layer Dyneema® composite Lining: breathable polyester mesh for comfort and airflow Certified Safety Standards EN ISO 11393-2:2019 Class 1 – 20 m/s design C (all-round protection) EN ISO 13688:2013 – General performance requirements for protective clothing CE/UKCA marking compliant with EU Regulation 2016/425 Designed for Arborist Chainsaw Work These trousers deliver top-tier cut protection while maximising wear-time comfort and visibility. Reflective accents ensure you’re seen in low-light or roadside environments.

SIP Protection Progress Arborist Rail Hi-Vis Orange Chainsaw Trousers – Regular Fit (Type C) The SIP Protection Progress Arborist Rail Chainsaw Trousers are purpose-built for the rail sector, meeting all high-visibility standards and Network Rail approval. Constructed from full-stretch TeXXion HV fabric with Teflon™ water- and dirt-repellent finish and RIPSTOP TEKTOR reinforcement, they deliver comfort where you need it and cut protection where it matters. Key Features Six-layer Dyneema® inlay for Type C chainsaw cut resistance (24 m/s) Full-stretch TeXXion HV fabric with Teflon™ finish for water and dirt repellency RIPSTOP TEKTOR reinforcement in high-wear areas Network Rail approved for arborist rail applications Elasticated waistband with belt loops and brace buttons for secure fit Exterior Front zip fly with button & clip closure Two inset zippered hand pockets Rear patched pocket with zip Patched utility pocket on left leg Reflective beading above the knees for enhanced visibility Triple-needle stitching on back seam and inside leg for durability Interior Comfort lining: 65% polyester / 35% cotton (85 g/m²)

ISC Squirrel Tether with Pulley The Squirrel Tether is the ONLY metal tether for the ISC Rope Wrench, designed and manufactured exclusively by ISC in Wales, United Kingdom! The Squirrel Tether is designed for low-friction ascents and optimal engagement of the Rope Wrench, as required during descent and lateral movements within the canopy. The new Squirrel Tether is manufactured from Aluminium, which ensures that twist and flex in the Rope Wrench system, is minimal. This means that the Rope Wrench remains in the optimal low friction position during ascent, (allowing the climber to achieve maximum climb efficiency), and ensures that the Wrench engages efficiently, as required during lateral movements and descent. The Squirrel is fitted with a stopper bollard, which keeps the Rope Wrench correctly positioned, to ensure correct engagement on the rope. The stopper bollard also prevents the Rope Wrench from pinching/squashing the user’s hand. This means that the user can safely handle the upper or lower part of the tether, when tending/adjusting the system, on the rope. The Squirrel can be used with an SRS Chest Harness, for hands-free tending of the system, while ascending. The Squirrel offers a choice of four SRS Chest Harness attachment points, allowing users to position their harness, according to the type of chest harness used- and to their personal preference. The secondary aperture of the Squirrel Pulley provides an attachment point for the addition of a secondary system, which means that the Squirrel system can be used for rescues. The Squirrel can be used with the 11-13mm Rope Wrench (RP280) Please note the Squirrel tether is replacement part for existing ISC squirrel tether PPE kits. Registered Design No. 6108494 Technical Information Compatible with rope diameter (mm)11-13mm (MBS) Minimum Breaking Strength (kN)24 (MBS) Minimum Breaking Strength (lbf)5295 ANSI compliant versionAs standard Serial numberingAs standard FinishAnodised Weight (grams)350 Weight (ounces)12 Height (mm)319 Height (inches)12 9/16″

ARB Surplus 150 Grade Chain Oil - 10 Litre ARB surplus Chainsaw Oil delivers high-performance lubrication for both professional and home owner hand-held chainsaws. Formulated with a 150-grade viscosity, it ensures smooth cutting while protecting your bar and chain from excessive wear. Engineered with anti-fling properties, this oil stays where it’s needed—reducing mess and maintaining performance. ARB Surplus chainsaw oils are made from premium virgin mineral base oils combined with carefully chosen additives to deliver outstanding performance. Key benefits include: Compatible with both petrol and electric chainsaws Excellent resistance to fling-off Strong wear protection for extended tool life Reliable defence against corrosion Long-lasting lubrication under tough conditions

Husqvarna Working with Chainsaws Manual - Part 1 A4 Size 70 pages Categories featured: Basic Rules Tree Felling Hang Up Limbing Cross Cutting Kickback Safety inspection and service

SIP Protection Technical Short Sleeve Work T-Shirt The SIP Protection Technical Short Sleeve Work T-Shirt is engineered for all-day comfort and durability on the job. Crafted from a high-performance technical knit, it delivers superior breathability and moisture-wicking to keep you cool and dry, whether you’re working outdoors, in the workshop, or on the move. Key Features Technical fabric construction for enhanced airflow and flexibility Moisture-wicking finish to draw sweat away from the skin Regular fit for unrestricted movement and layering Short sleeves for ease of wear under protective gear Available in sizes S–XXXL for the perfect work-ready fit Ideal Applications Perfect for outdoor tasks, maintenance work, and casual wear, this t-shirt balances professional performance with everyday comfort. Its durable construction stands up to demanding environments while remaining soft against the skin. Fit & Fabric Made from a stretch-enhanced polyester blend, the shirt retains its shape wash after wash. The regular cut sits close enough for a neat appearance but allows freedom of movement, making it an essential layer under jackets or over base layers.

SIP Protection Timber 2.0 Chainsaw Boots – Class 2 The SIP Protection Timber 2.0 Chainsaw Boots are a no-nonsense solution for forestry professionals who need reliable protection without the unnecessary extras. Designed for practicality, safety, and durability, these boots are ideal for seasonal forestry work or occasional chainsaw use. They deliver Class 2 chainsaw protection, solid mechanical resistance, and essential comfort features—all at a budget-friendly price. Key Features: Certified Class 2 chainsaw protection (24 m/s) S3 mechanical resistance with steel toe cap and Kevlar® anti-perforation sole Designed for functionality and safety without added bulk Water-resistant upper and slip-resistant sole Simple, durable design built for forestry environments Exterior Protection: Injected nitrile rubber indented sole for long-term durability Heat contact resistance (HRO) Energy absorption at the heel (E) Waterproof (WR) construction Cold insulation (CI) and heat insulation (HI) Slip-resistant sole (SRA) and hydrocarbon resistance (FO) Interior Construction: Steel toe cap resistant to 200 J of impact and 1500 daN of pressure Kevlar® anti-perforation sole (P) Antistatic properties (A) Closed heel design with water-resistant upper (WRU) Comfortable, no-frills interior designed for long hours on your feet Materials: Upper Material: Black buffalo leather, thickness 1.8–2.0 mm Certified Standards: EN ISO 17249:2013 – Chainsaw protective footwear, Level 2 EN ISO 20345:2011 – S3 HRO CI