Ms 341 starting issues

[spudulike]

Well after many attempts myself i decided enough was enough, and most importantly before i seized my saw. So tonight i popped it over to steve (only just over 30 mins away) for a look and hopefully just a tune up. He quickly realised that the impulse line had become separated (my fault when changing anti vibe rubbers i think) after a bit of a run and a little bit of adjusting he the saw was up and running well again, not quite good enough for Steve though so the carb was opened up, cleaned and then with a bit more tinkering with the adjustment screws he was as happy with it as i was! i know he already has a very good reputation on here but i would just like to add my opinion and say how happy i am with his service! I would certainly reccomend his services and would definitely use him for any other problems i encounter!

 

Top bloke who couldn't have been any more helpful!

 

Thanks George, lucky you didn't run it as it would have gone pop with the impulse line loose.

 

Next time you have spare time, I think your clutch springs are a bit slack, they ring a bit on idle, meant to mention it!

 

Glad to help, hope all works out fine now!