MS200T Recoil spring

[Ray1]

Nowt wrong with that, wind it up by hand, pair or needle nose pliers and in it goes. If your trying to wind it directly into the housing, remove the air guide its easier.

Edited July 27, 2014 by Ray1

[spudulike]

These ones are about the easiest ones to do, put on the safety specs, place the bent end in the plastic moulding and feed it in holding it in place with both thumbs, it really isn't difficult:001_rolleyes:

[wicklamulla]

Spud etc, you guys are correctamundo. I did it after 5 attempts when the missus said try winding it in the udder way round (opposite way to what felt correct) and she was correct too. Cheers, bays and gurl(s)